You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




08 wheel cleaning
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
wroman
Posted 2009-05-13 7:42 AM (#34455)
Subject: 08 wheel cleaning


Tourer

Posts: 432
Gettysburg, 2008 Tour Premium
Trying to decide on an 08 vs 09 and wanted to know if the rough finish on the 08 wheels is as difficult to clean as it looks to be. Just a couple of 08's left around here and I need to decide.
Walt
Top of the page Bottom of the page
Blue Demon
Posted 2009-05-13 9:47 AM (#34463 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 99
Kansas City, Ks
I wouldn't say that the 08 wheels are hard to clean, but the 09's billet wheels will be easier.

And cleaning the rear wheel will be a pain on both!!!

Edited by Blue Demon 2009-05-13 9:47 AM
Top of the page Bottom of the page
Member No. 1
Posted 2009-05-13 10:16 AM (#34465 - in reply to #34463)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 257
Under the Rule of Jedi - Masshole
Since I own bikes with billet, chrome, and clear coated, I'll chime in.
Easiest to clean and keep looking clean were the painted/clear coated rims I had on my 99c.
Next are the chrome rims on the hammer. Easy to clean, but show dirt quickly.
Last is the billet. You really need to polish ( as in lots of work) to keep them looking good. Sure they look almost as good as chrome when clean, but like I said, you need to stay on them.
My 08 Vision rims are easy to keep looking nice. I'm hoping to power coat them this winter. Do I wish I had chrome, yes, if I could keep the rear clean, but I'm also glad I don't have billet on this bike. Rear would never get polished.
Top of the page Bottom of the page
docvtx
Posted 2009-05-13 12:21 PM (#34471 - in reply to #34455)
Subject: RE: 08 wheel cleaning


Cruiser

Posts: 98
Santa Maria CA
I have an 08 and the wheels are easy to keep clean. I just spray detail polish and wipe off or a damp cloth. I have bilet wheel on another bike and I am aways polishing.
Top of the page Bottom of the page
GURNZ
Posted 2009-05-13 4:43 PM (#34480 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 118
Spfld, IL but temp Bay area, CA
08's are easy to clean but unless you have a stand that let's the rear spin free (I don't), the rears are a PAIN
Top of the page Bottom of the page
cw1115
Posted 2009-05-13 8:18 PM (#34499 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Visionary

Posts: 1290
Ruskin, Fl
I need two new tires. Spoke to the dealer today. While the wheels are off the bike the rims and the rear pully are going for powdercoat. Has to look better than the stock gray.
Top of the page Bottom of the page
Member No. 1
Posted 2009-05-13 8:26 PM (#34500 - in reply to #34499)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 257
Under the Rule of Jedi - Masshole
cw1115 - 2009-05-13 9:18 PM

I need two new tires. Spoke to the dealer today. While the wheels are off the bike the rims and the rear pully are going for powdercoat. Has to look better than the stock gray.
I've been thinking of this also. What color are you planning on? There will be pics right?!
Top of the page Bottom of the page
cw1115
Posted 2009-05-14 4:33 PM (#34581 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Visionary

Posts: 1290
Ruskin, Fl
I'm going with "wet black". Should be very high gloss. Tires need to be replaced forthwith, so I'll drop it off after next weekend. Photos as soon as I get it done.
Top of the page Bottom of the page
Member No. 1
Posted 2009-05-14 4:35 PM (#34583 - in reply to #34581)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 257
Under the Rule of Jedi - Masshole
Sweet, that's what I was planning also. Drool starting to form as I wait for pictures!
Top of the page Bottom of the page
Shyster
Posted 2009-05-16 2:02 PM (#34748 - in reply to #34463)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 69
I mentioned this issue to a friend who has an '08 Vision and he says the easiest way to do the rear wheel (and detail the bike itself) is to lay it over on one side (put some carpet or something down for the tipovers), do one side then flip it over.  I haven't tried leaning it over and picking it back up yet (I'm muscularily challenged) however I've seen him do it w/no problem.
Top of the page Bottom of the page
Teach
Posted 2009-05-16 9:57 PM (#34768 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Visionary

Posts: 1436
I have the stock 08 wheels. Spray with simply green, walk away for 5 minutes, spray off with hose..... If you need to run the wheel around the two best options I've found are bike lift/jack, or tip it over. The standard wheels clean up easy and don't get dirty easily IMO
Top of the page Bottom of the page
wseemann
Posted 2009-05-16 11:15 PM (#34771 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Cruiser

Posts: 215
Boydsville, AR United States
I have 2 pcs of 3/8" particale board about 18" square. I lay the bike on these and use my shop stool to scrub the lower parts of the bike, and wheels. Works good for me. If you do it the right way and use your back, It lifts easy.
Top of the page Bottom of the page
Arkainzeye
Posted 2009-05-17 5:04 AM (#34784 - in reply to #34455)
Subject: Re: 08 wheel cleaning


Visionary

Posts: 3773
Pittsburgh, PA
ive had many bikes and my last scooter had Custom R.C. wheels. i will say my 2008 vision (non-chrome) wheels are by far the easiest i have had to keep clean! Im glad they arent chrome and you wouldnt even barely see the rear one anyways! and because of this, i dont even clean them that much. and when i do, i use a wheel cleaner spray and let it sit, then hose it off.. i have yet in one year have had to scrub my wheels. but when i had chrome wheels holy crap was that another story!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™