|
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | I just installed the clear tail lamps w/ amber and red LED's. As has been posted, they blink much faster due to the low draw. I have a load equalizer, but have no clue which wires to tap into. Any help would be appreciated.
Here's how she looks now:
http://www.youtube.com/watch?v=6LrDRE8Jw3U |
|
| |
|
Cruiser
Posts: 117
Spring Hill, Tennessee | Where did you get the clear lens cover? |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Tennessee Vision - 2009-11-24 7:53 PM Where did you get the clear lens cover? The clear taillamp is from here http://www.arizonavictory.com/eshopprod_cat_2302-61041_product_829586.Clear_Taillights_for_Vision.htm |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | If you do this, DONT take the LED's they offer. They are only 25's and are bright enough at night, but get a little washed out in daylight. Get some 60's or 92's . . . a little more expensive, but definately brighter! |
|
| |
|
Cruiser
Posts: 154
| Looks great, how was the install? Easy or PITA? |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | Very easy install. Removed seat, trunk, lic plate bracket, and lower grey "bumper" covers. Snapped out the "M" shaped trim around tail lights. Popped a few screws loose holding tail lamps on, replaced bulbs, and reassembled. Took me about 1 hour. I wished I had taken pics to post. Good luck! |
|
| |
Clear Tail Lamps w/ LED's Blinking FAST
