You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




looking for a on/off switch to fit in the dash.
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
aaronrkelly
Posted 2010-04-28 1:09 AM (#58546)
Subject: looking for a on/off switch to fit in the dash.


Tourer

Posts: 395
Moravia, IA
As the posts says. Im looking to add an accessory that needs ON/OFF switch.....figured someone had a part number or line on the right switch to snap in the empty spot on the dash panel.

Thanks a bunch.
Top of the page Bottom of the page
kenhiggins
Posted 2010-04-28 3:26 AM (#58547 - in reply to #58546)
Subject: Re: looking for a on/off switch to fit in the dash.


Cruiser

Posts: 249
Montreal, QC Canada
4011317 is the part #. You can find all parts at this site

http://parts.polarisind.com/Browse/Browse.asp
Top of the page Bottom of the page
rikrok
Posted 2010-04-28 6:13 AM (#58551 - in reply to #58546)
Subject: Re: looking for a on/off switch to fit in the dash.


Cruiser

Posts: 76
Be prepared. I checked and either of the switches were almost $30 each. I just picked up a rocker switch at an electronics supply for about $2, It snapped right in. It's not water prrof, but in less you submerse it, it will never be a problem.

Edited by rikrok 2010-04-28 6:14 AM
Top of the page Bottom of the page
Ploz58
Posted 2010-04-28 6:54 AM (#58552 - in reply to #58546)
Subject: Re: looking for a on/off switch to fit in the dash.


Cruiser

Posts: 70
Central Victoria, Australia
illuminated switches would be nice, to confirm they are on!!
if you find a supplier, i think there would be a few takers,
victory should put them on our wish list for model upgrades, the rest of the dash is so well lit, its seems an oversignt
Top of the page Bottom of the page
mleiten
Posted 2010-04-28 8:38 AM (#58559 - in reply to #58546)
Subject: RE: looking for a on/off switch to fit in the dash.


Cruiser

Posts: 64
St. Louis, MO United States
I took one of my switches to an Autozone and found one that matched nearly perfect. Not water proof but it fits perfectly in the last available slot on the dash. Used mine for LED lighting.
Top of the page Bottom of the page
clubford00
Posted 2010-04-28 10:09 AM (#58568 - in reply to #58546)
Subject: Re: looking for a on/off switch to fit in the dash.


Tourer

Posts: 301
Buffalo Grove,Ill
I was thinking the same thing but bringing the forward seat heater switch to the dash. (screw the passenger) LOL
Top of the page Bottom of the page
yoyo
Posted 2010-04-28 10:12 AM (#58569 - in reply to #58546)
Subject: RE: looking for a on/off switch to fit in the dash.


Cruiser

Posts: 62
ESCALON CA.
I AM ALSO LOOKING FOR A MOMENTARY SWITCH TO USE WITH MY FLASH TO PASS GARAGE DOOR OPENER.
Top of the page Bottom of the page
Rakk17
Posted 2010-04-28 10:38 AM (#58570 - in reply to #58569)
Subject: RE: looking for a on/off switch to fit in the dash.


Puddle Jumper

Posts: 47
yoyo - 2010-04-28 8:12 AM

I AM ALSO LOOKING FOR A MOMENTARY SWITCH TO USE WITH MY FLASH TO PASS GARAGE DOOR OPENER.


Escalon??? You guys have garages in Escalon lol (Manteca here)

I was thinking about a rocker for the flash to pass also. How do you like that flash to pass?
Top of the page Bottom of the page
nailer
Posted 2010-04-28 10:44 AM (#58572 - in reply to #58546)
Subject: RE: looking for a on/off switch to fit in the dash.


Tourer

Posts: 366
Albuquerque, NM
If anyone has the dimensions of the dash slot for the switch handy, I can look for an equivalent switch at Newark, Digikey, Mouser, or MCM. Will look for momentary function, lighted, and maybe weather resistant properties. I source electronic parts like this at work all the time.

Edited by nailer 2010-04-28 10:45 AM
Top of the page Bottom of the page
WillieByte
Posted 2010-04-28 10:45 AM (#58573 - in reply to #58546)
Subject: Re: looking for a on/off switch to fit in the dash.


Cruiser

Posts: 104
Plainfield Illinois
Cherry makes all kinds of rocker switches. Illuminated or not, also momentary if you want that.
http://www.cherrycorp.com/english/switches/rockers/index.htm

Top of the page Bottom of the page
victoryvisiontour
Posted 2010-04-28 10:59 AM (#58575 - in reply to #58546)
Subject: RE: looking for a on/off switch to fit in the dash.


Iron Butt

Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis)
I'm going to use an accessory switch to power the lighted Victory badges on the sides of the bike. (Currently, they only come on when the key is on.) Then I can sit at the streetside eatery and watch the badges catch the attention of passersby.

Edited by victoryvisiontour 2010-04-28 11:00 AM
Top of the page Bottom of the page
joe schmoe
Posted 2010-04-28 11:39 AM (#58577 - in reply to #58570)
Subject: RE: looking for a on/off switch to fit in the dash.


Tourer

Posts: 446
East TN

Rakk17 - 2010-04-28 11:38 AM yoyo - 2010-04-28 8:12 AM I AM ALSO LOOKING FOR A MOMENTARY SWITCH TO USE WITH MY FLASH TO PASS GARAGE DOOR OPENER. Escalon??? You guys have garages in Escalon lol (Manteca here) I was thinking about a rocker for the flash to pass also. How do you like that flash to pass?


WHY??? Just tie the flash to pass in on your high beams and it works...I've had mine for 9 months now and LOVE IT...Just hit the high beams twice and doen..>Garage opens and all is good...

Top of the page Bottom of the page
joe schmoe
Posted 2010-04-28 11:41 AM (#58578 - in reply to #58552)
Subject: Re: looking for a on/off switch to fit in the dash.


Tourer

Posts: 446
East TN

Ploz58 - 2010-04-28 7:54 AM illuminated switches would be nice, to confirm they are on!! if you find a supplier, i think there would be a few takers, victory should put them on our wish list for model upgrades, the rest of the dash is so well lit, its seems an oversignt

 

Yep I would replace all of mine if there were exact replacement for the stock one!!

Top of the page Bottom of the page
Lotzafun
Posted 2010-04-28 1:31 PM (#58582 - in reply to #58578)
Subject: Re: looking for a on/off switch to fit in the dash.


Iron Butt

Posts: 935
Rockford, IL
The solution is contained somewhere in this multi-page thread.... http://www.vision-riders.com/bb/forums/thread-view.asp?tid=2120&sta...
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™