|
|
Tourer
Posts: 309
Vineland, NJ United States | I ride two up most of time and pull a uni-go one-wheel trailer about a third of the time, how many miles should I start thinking about brake pad replacement. I have 11,000 miles on now? |
|
| |
|
Visionary
Posts: 1484
LaPorte,Tx. | If you still have the stock brake pads on your bike, they have a groove cut into the pads that you can see. If the pad is worn down so you can't see that groove, then your ready for a change. If I remember right, the front pads should be changed a ~.060" thickness and the rear at ~.040" thickness. A set number of miles is hard to give as different riders use their brakes differently.
Edited by VisionTex 2010-08-31 12:44 PM
|
|
| |
|
Visionary
Posts: 2027
Brighton, TN | Just changed mine out at 41,000. They were well worn. |
|
| |
|
Cruiser
Posts: 256
| Any good aftermarket replacements? |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | i cant speak for aftermarket pads for victorys but i remember aftermarket for kawasakis meant noisey brakes later |
|
| |
|
Cruiser
Posts: 113
East Ohio | Just changed mine at 23000, getting ready to put 2000 more on it going to Santa Rosa Beach Fl, will put 830 miles on it this Sat
Go Super Steel |
|
| |
|
Tourer
Posts: 415
| 26,000 miles on my originals.
Just took out the fronts, cleaned the grooves and put them back in.
Stops like brand new with half the pads left. |
|
| |
|
Tourer
Posts: 446
East TN | Prime Power - 2010-08-31 6:58 PM Any good aftermarket replacements? Haven't had to replace my Vision brakes yet, when I do it will be with Lyndall's http://www.lyndallracingbrakes.com/ They are awesome!! |
|
| |
|
Cruiser
Posts: 175
Hinton, Iowa | Just changed my rear ones at 26000 along with my new 2nd new rear tire. |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | I changed mine at 25K. I got every bit of life out of them. I was just starting to hit metal. I caught it just in the nick of time before I damaged the rotots. I did the rear at the same time, they were overdue also. I didn't want to wait for the EBCs to be ordered, so I put Honda pads on. I am very happy with them. Same pads as the Goldwing. They cost more, but he charged the same price as the EBC. |
|
| |
|
Cruiser
Posts: 256
| Thanks. Anyone know the part # we need. On the lyndalls, he only list one for all the vics. Do those fit ours? |
|
| |
|
Cruiser
Posts: 175
Hinton, Iowa | Used EBC FA196HH. Popular one, easy to find. Got mine at a Honda dealer. Didn't do the front but the front EBC # is FA261HH. Hope this helps.
Ride Safe, Mike |
|
| |
Brake Replacement
