You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Fuses Burning Out On Turn Signal Circuit
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Glen B
Posted 2011-08-06 1:02 PM (#92787)
Subject: Fuses Burning Out On Turn Signal Circuit


Puddle Jumper

Posts: 10
Niagara Region, Ontario, Canada
Has anyone else had a problem with this?

My wife's 2009 Vision Tour is burning out fuses on the circuit for the turn signals.

She gets approx. 3 hours running and then they go.

She is currently in NH with the bike and will be back on Tues.

I already have her booked in with the dealer when she gets back but I wanted to see if anyone had any ideas on the cause.

We have not touched or modified the electrical system on it.
Top of the page Bottom of the page
Cap'n Nemo
Posted 2011-08-06 2:12 PM (#92794 - in reply to #92787)
Subject: Re: Fuses Burning Out On Turn Signal Circuit


Visionary

Posts: 1359
New Bohemia, Va
pinched wire somewhere to one of the signals. That's the best I know. Hope you find it soon.
Top of the page Bottom of the page
Glen B
Posted 2011-08-06 3:11 PM (#92800 - in reply to #92787)
Subject: Re: Fuses Burning Out On Turn Signal Circuit


Puddle Jumper

Posts: 10
Niagara Region, Ontario, Canada
Yeah, that's what I was afraid it was.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™