You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




GARMAN 665 INSTALL
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
jwsnap
Posted 2011-12-23 8:53 PM (#103993)
Subject: GARMAN 665 INSTALL


New user

Posts: 2
Could some one give me some insight on installing a zumo on my 2012 vision. I had the zumo from last bike, is there a harness some were to pick up ground & hot that is prewired.
Top of the page Bottom of the page
Soarer
Posted 2012-01-14 6:01 PM (#105391 - in reply to #103993)
Subject: Re: GARMAN 665 INSTALL


Puddle Jumper

Posts: 7
isn't all you need is the harness?? Garmin Zumo GPS - Audio Integration Harness 2877930, plus a mount... i discovered on my 08 that the mount and harness are two separate things...
Top of the page Bottom of the page
Nozzledog
Posted 2012-01-15 1:53 AM (#105401 - in reply to #103993)
Subject: Re: GARMAN 665 INSTALL


Visionary

Posts: 1229
Rancho Cucamonga, CA
If you look into the steering well, on the right side, you will see a small bundle of wires with a plug endcap. This is where the GPS harness plugs into. The only problem, is that it only has mono audio, so most with a 660 or 665 use the garmin harness included with the 660/665 and plug into the mp3 input to get stereo sound. I used the ipod power/ground for my 665 as well and bypassed the whole GPS harness all together, but now I only get GPS nav direction thru my bluetooth headset if I am listening to the FM radio. XM and mp3 not an issue.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™