|
|
Cruiser
Posts: 232
| Changed the oil in vision All went well until i was wiping it off afterward. Then i spotted down by the right side tip over there was a 1'' crack next to tip over could the dealer have done this when they changed my headlight?Does that part of the body have to come off to replace the assembly? haven't been down but once on the left side the tip overs work no damage to let side. Does not seem to affect the bike other than ugly. One more question do those black rubber that go in front of floorboards go out to tip overs?
Edited by TRELL 2012-02-19 2:19 PM
|
|
| |
|
Iron Butt
Posts: 965
New York State | http://motoworldracing.com/i-7248282-victory-motorcycle-vision-fair...
The toe kick protectors do not cover the tip overs.
As far as the crack that should be a warrenty issue
Edited by Trekwolf164 2012-02-19 3:02 PM
|
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | TRELL - 2012-02-19 3:14 PM Changed the oil in vision All went well until i was wiping it off afterward. Then i spotted down by the right side tip over there was a 1'' crack next to tip over could the dealer have done this when they changed my headlight?Does that part of the body have to come off to replace the assembly? haven't been down but once on the left side the tip overs work no damage to let side. Does not seem to affect the bike other than ugly. One more question do those black rubber that go in front of floorboards go out to tip overs? Can you take a picture? Sorry for this to happen. |
|
| |
|
Cruiser
Posts: 232
| varyder - 2012-02-19 3:17 PM
TRELL - 2012-02-19 3:14 PM Changed the oil in vision All went well until i was wiping it off afterward. Then i spotted down by the right side tip over there was a 1'' crack next to tip over could the dealer have done this when they changed my headlight?Does that part of the body have to come off to replace the assembly? haven't been down but once on the left side the tip overs work no damage to let side. Does not seem to affect the bike other than ugly. One more question do those black rubber that go in front of floorboards go out to tip overs? Can you take a picture? Sorry for this to happen.
YES i can take picture but do not know how to post them here...I could email picture to you or anyone that wants them. |
|
| |
|
Cruiser
Posts: 232
| Just took picture of crack in side will try and figure out how to post. |
|
| |
|
Cruiser
Posts: 232
| Just took picture of crack in side will try and figure out how to post. |
|
| |
|
Cruiser
Posts: 232
| TRELL - 2012-02-20 2:42 PM
Just took picture of crack in side will try and figure out how to post. try to post to gallery says photes to large. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | send me the picture, I'll post, you have a PM... or did. |
|
| |
|
Visionary
Posts: 4278
| Trell
right click photo click edit now look in upper left corner where it says resize. Click that not change size to 30% click red x in upper right corner now click save and try down load here if not re do all that I have said and make photo 20% the more words on the page you'll have to make photo smaller.
Good Luck |
|
| |
|
Cruiser
Posts: 232
| UPDATE... the dealer call today say the factory say no go on the crack by the tip over even tho it had never been down on that side. Will try to call factory myself when we return from bike wk in FL. If i have to fix myself I will then try to recoup my loses thru legal mean .The wife is beside herself.
we love the bike and this will leave a bad taste in our mouths..So now I'll have a good story for all the rallies we go to.. |
|
| |
|
Tourer
Posts: 430
| Hope it works out in your favor. |
|
| |
|
Cruiser
Posts: 82
Fargo, ND | +1 |
|
| |
TIPOVER CRACK
