You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 262
Flowery Branch Ga | I used the search with no luck. Someboby somewhere posted a how to on removing the black center from the factory tip. I can't remember who did it or where I saw it. Can some one point me in the direction of this mod? |
|
| |
|
Puddle Jumper
Posts: 28
Lynnwood, WA United States | I think this shows what you are looking for:
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=6173&pos... |
|
| |
|
Cruiser
Posts: 262
Flowery Branch Ga | That wasn't the one. The mod I'm looking for removes the black center from the factory tip, then you put the factory tip back on.
|
|
| |
|
Puddle Jumper
Posts: 28
Lynnwood, WA United States | If you look at the whole article, a little ways down, it shows you how to take apart the tips. |
|
| |
|
Visionary
Posts: 4278
| I used a step drill bit it was great. Just drill out the bushing that is in the tips.
Then I went to the hardware store and bought whats called speed nuts. You find them in those little bins. I bought the ones for 1/4x 20 and then bolts and washers. Very easy job and I think I pick up some great sound from my S1's. Three thousand miles and have never come loose.
http://www.sears.com/shc/s/search=step%20drill?storeId=10153&catalo...
http://images.search.yahoo.com/images/view;_ylt=A0PDoX9tdt5PU2YAVyq... |
|
| |
|
Cruiser
Posts: 262
Flowery Branch Ga | john frey------- I think it was you that made the how to post that I'm looking for. Thanks for the refresher.
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Factory Tip Mod
