You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 54
Bancroft Ontario, Canada | Eh!
Just got my 09 vision....black....pulled all the trim off to paint and i have a question
Some of the trim parts look like brushed aluminum....not painted aluminum.....could someone advise me of anything i should know about painting these parts....do they require a special primer?? etc ...or just paint....
Thanks for any thoughts
Bear |
|
| |
|
Iron Butt
Posts: 725
Reno County, KS | Dead horse. Forum search it. |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Gotta be primed/sealed otherwise the brushed will show thru the paint and make it look pretty rough. |
|
| |
|
Cruiser
Posts: 72
Eyota, MN | What I did with mine is sanded them with 180 sandpaper, one coat of acid etch primer, three coats of high build primer (for some cushion from rocks hitting it), sanded with 400 to 600 sandpaper and then three coats of basecoat and two coats of clearcoat. I did mine when I had 350 miles on it and now I have 8500 miles on it and it still looks great. Take a look at mine in the gallery (Joe H) |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Painting vision trim parts
