You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Found a way to mount my Vision...
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
willtill
Posted 2011-09-26 10:13 AM (#97715)
Subject: Found a way to mount my Vision...


Visionary

Posts: 1365
Central Maryland
...without kicking the chit out of the passenger backrests and speaker housing with my boot;

0. while holding left handgrip with left hand
1. put down left passenger foot rest.
2. step on passenger footrest with left foot
3. easily lift right leg over DRIVERS seat
4. step on right drivers floorboard
5. sit down and move left foot to left floorboard

..and pretty much the same thing in reverse; to dismount. Works well. Would seem to be awkward looking (not a traditional way to mount a motorcycle; but it makes it a lot easier with that cargo trunk on the back.



Edited by willtill 2011-09-26 10:17 AM
Top of the page Bottom of the page
glighto11
Posted 2011-09-26 10:18 AM (#97716 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Iron Butt

Posts: 741
Central New York
A 'wise' man would be able to eliminate step 1 because they are always down.
A 'wise' man is one that has already jammed his foot under the rear tip over and learned that the passenger foot rest can prevent a reoccurence of that painful event.
Top of the page Bottom of the page
TerryW527
Posted 2011-09-26 10:29 AM (#97719 - in reply to #97716)
Subject: Re: Found a way to mount my Vision...


Cruiser

Posts: 81
Lynnwood, WA
Hmmm... Seems you have been watching me all the way from NY, glighto11...! It only took 3 or 4 times for me to figure it out, though...

Terry
Top of the page Bottom of the page
willtill
Posted 2011-09-26 10:37 AM (#97722 - in reply to #97716)
Subject: Re: Found a way to mount my Vision...


Visionary

Posts: 1365
Central Maryland
glighto11 - 2011-09-26 11:18 AM

A 'wise' man would be able to eliminate step 1 because they are always down.
A 'wise' man is one that has already jammed his foot under the rear tip over and learned that the passenger foot rest can prevent a reoccurence of that painful event.



A "wiser" man would take note of wise man's remarks... and adopt it. Eliminating step 1. Thanks for the insight and advice/tip...!
Top of the page Bottom of the page
Moose381
Posted 2011-09-26 10:38 AM (#97723 - in reply to #97715)
Subject: RE: Found a way to mount my Vision...


Puddle Jumper

Posts: 49
Lillian, Alabama
Wow, I didn't realize it was supposed to be so complicated. I just walk up to the bike....then...

1. Step over the seat with my right foot.
2. Sit down, start the bike and ride.

Getting off is pretty much just the same thing in reverse.

Top of the page Bottom of the page
varyder
Posted 2011-09-26 10:42 AM (#97724 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Visionary

Posts: 8144
New Bohemia, VA
unless you just can't do it, high step over the pilot seat and you're in.

I grab the left bar, step over like I'm walking and then skip the left foot in closer to settle in. I've got a 30" inseam and as coordinated as a bull in a china shop, yet I found no easier way.

A concern I have in stepping into the bike using the floorboards, either pilot or pillion, is if it is wet, you may slip. It also puts a lot of pressure from my overweight carcass that I'm afraid it will snap the kick.

Also +1 on keeping the passenger floorboards down --->WARNING<--- the tip-overs will bite, it is just a matter of when, the floorboards are an early warning system to let you know when to get you foot out of the way.

Edited by varyder 2011-09-26 10:46 AM
Top of the page Bottom of the page
hdfed
Posted 2011-09-26 10:45 AM (#97725 - in reply to #97715)
Subject: RE: Found a way to mount my Vision...


Cruiser

Posts: 102
Orlando
Must be a bitch being vertically challenged!
Top of the page Bottom of the page
willtill
Posted 2011-09-26 11:03 AM (#97731 - in reply to #97725)
Subject: RE: Found a way to mount my Vision...


Visionary

Posts: 1365
Central Maryland
hdfed - 2011-09-26 11:45 AM

Must be a bitch being vertically challenged!


Lol! No, it's not that. My inseam is 30" and my height is 5" 10". It's just almost every time I swing my leg over the seat; my boot hits the edge passenger's pad in the trunk area of the seat (no matter how careful I try to be). The pad material is getting beat up.

I got the idea from this:

http://www.youtube.com/watch?v=u_OK-D5zW3M&feature=player_embedded
Top of the page Bottom of the page
iluvink
Posted 2011-09-26 11:22 AM (#97733 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Tourer

Posts: 411
Dallas, Texas
I prefer the 'Lone Ranger' style...run up from behind the bike, and then 'leap frog' over the trunk and into the seat...takes a llittle practice...
Top of the page Bottom of the page
kris1956
Posted 2011-09-26 11:56 AM (#97738 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Iron Butt

Posts: 1109
Not a problem here, being 6'2" with a 35" inseam helps.
Top of the page Bottom of the page
Travelin Man
Posted 2011-09-26 12:24 PM (#97739 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Iron Butt

Posts: 721
I also used to bump or kick the left speaker and or the right passenger grab rail but I haven't hit either since I started mounting the bike from the right side which is how motorcycle cops are taught to get on the bike so that they are never out in traffic. It's easier than you think once you get used to doing it and it makes getting off the bike much easier too!
Top of the page Bottom of the page
Shadow-Bear
Posted 2011-09-26 1:18 PM (#97754 - in reply to #97733)
Subject: Re: Found a way to mount my Vision...


Puddle Jumper

Posts: 40
South Central Pennsylvania
Lone Ranger Leap -Wow, that would take a LOT of practice, and some precautionary sporting good apparral until you have mastered the correct leap height!

Edited by Shadow-Bear 2011-09-26 1:19 PM
Top of the page Bottom of the page
bigfoot
Posted 2011-09-26 1:36 PM (#97756 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Tourer

Posts: 494
Akron Ohio area
"Short people got no reason to live"

Randy Newman

Short people got no reason
Short people got no reason
Short people got no reason
To live

They got little hands
And little eyes
And they walk around
Tellin' great big lies
They got little noses
And tiny little teeth
They wear platform shoes
On their nasty little feet

Well, I don't want no short people
Don't want no short people
Don't want no short people
Round here

Short people are just the same
As you and I
(A fool such as I)
All men are brothers
Until the day they die
(It's a wonderful world)

Short people got nobody
Short people got nobody
Short people got nobody
To love

They got little baby legs
And they stand so low
You got to pick 'em up
Just to say hello
They got little cars
That got beep, beep, beep
They got little voices
Goin' peep, peep, peep
They got grubby little fingers
And dirty little minds
They're gonna get you every time
Well, I don't want no short people
Don't want no short people
Don't want no short people
'Round here
Top of the page Bottom of the page
donetracey
Posted 2011-09-26 2:06 PM (#97760 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Visionary

Posts: 2118
Pitt Meadows, BC Canada
Will - I've been doing it your way since my first backrest back in '79. It gets to lookin' downright sexy after all the years I been doin' it.
It looks MUCH better than ANYTHING the 'tall' guys do and the girls LOVE it !!! And so does the paint on your bike ....
Top of the page Bottom of the page
GURNZ
Posted 2011-09-26 2:10 PM (#97762 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Cruiser

Posts: 118
Spfld, IL but temp Bay area, CA
Really love my Vision but I'm not "mounting" it for anything
Top of the page Bottom of the page
willtill
Posted 2011-09-26 2:24 PM (#97765 - in reply to #97760)
Subject: Re: Found a way to mount my Vision...


Visionary

Posts: 1365
Central Maryland
donetracey - 2011-09-26 3:06 PM

Will - I've been doing it your way since my first backrest back in '79. It gets to lookin' downright sexy after all the years I been doin' it.
It looks MUCH better than ANYTHING the 'tall' guys do and the girls LOVE it !!! And so does the paint on your bike ....


It does look pretty cool.. walk up, step up and step into the bike.
Top of the page Bottom of the page
HLUSN8
Posted 2011-09-26 3:56 PM (#97778 - in reply to #97715)
Subject: RE: Found a way to mount my Vision...


Cruiser

Posts: 164
Quad Cities, IL
I am likely the odd duck here...I mount from the high side, the right side that is. I also dismount to the right.

This is typical of Police officer mouting and dismounting to stay out of the flow of traffic. I am not a MotorCop but this was also taugh at an advanced riders course I took as the safer way (if the kickstand isn't deployed or gives way, and the bike starts to go you don't have the chance of being pinned...and with tip-over-protection if it goes no big deal).

I actually find this easier too because if you think about it you are clearing the high side with your left foot as your first step and since your foot wants to naturally go downward as you straddle the seat, it now follows the flow of the bike which is leaning left rather than scrapping the seat or kicking the back rest. Haven't kicked by seat in a long time.

It works well for me.
Top of the page Bottom of the page
RhodeTrip
Posted 2011-09-26 4:12 PM (#97782 - in reply to #97778)
Subject: RE: Found a way to mount my Vision...


Cruiser

Posts: 185
Rhode Island
HLUSN8 - 2011-09-26 3:56 PM

I am likely the odd duck here...I mount from the high side, the right side that is. I also dismount to the right.

This is typical of Police officer mouting and dismounting to stay out of the flow of traffic. I am not a MotorCop but this was also taugh at an advanced riders course I took as the safer way (if the kickstand isn't deployed or gives way, and the bike starts to go you don't have the chance of being pinned...and with tip-over-protection if it goes no big deal).

I actually find this easier too because if you think about it you are clearing the high side with your left foot as your first step and since your foot wants to naturally go downward as you straddle the seat, it now follows the flow of the bike which is leaning left rather than scrapping the seat or kicking the back rest. Haven't kicked by seat in a long time.

It works well for me.


+1

Jim
Top of the page Bottom of the page
Peter Warren
Posted 2011-09-26 4:51 PM (#97787 - in reply to #97778)
Subject: RE: Found a way to mount my Vision...


Puddle Jumper

Posts: 32
HLUSN8 - 2011-09-26 3:56 PM

I am likely the odd duck here...I mount from the high side, the right side that is. I also dismount to the right.

This is typical of Police officer mouting and dismounting to stay out of the flow of traffic. I am not a MotorCop but this was also taugh at an advanced riders course I took as the safer way (if the kickstand isn't deployed or gives way, and the bike starts to go you don't have the chance of being pinned...and with tip-over-protection if it goes no big deal).

I actually find this easier too because if you think about it you are clearing the high side with your left foot as your first step and since your foot wants to naturally go downward as you straddle the seat, it now follows the flow of the bike which is leaning left rather than scrapping the seat or kicking the back rest. Haven't kicked by seat in a long time.

It works well for me.


Thanks HLUSN8... I might try that.... but I'll have to move the kickstand to the right side so I'm out of the traffic out here in Australia....... hmmmmmmm........but then I'll have to mount from the left side .

I don't have a problem swinging my leg over the trunk at 6'7" (although any low flying birds in the immediate area are in danger ), but I have to agree that it sure is easier to slide the leg over the seat from the right..... I might do it more often .....

Pete
Top of the page Bottom of the page
glighto11
Posted 2011-09-26 5:05 PM (#97789 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Iron Butt

Posts: 741
Central New York
Now I know why I was never a police officer.
Top of the page Bottom of the page
Lone Ranger
Posted 2011-09-26 8:07 PM (#97803 - in reply to #97733)
Subject: Re: Found a way to mount my Vision...


Tourer

Posts: 447
Cleveland, GA

iluvink - 2011-09-26 12:22 PM I prefer the 'Lone Ranger' style...run up from behind the bike, and then 'leap frog' over the trunk and into the seat...takes a llittle practice...

Well, I'd like to be thought of as being that cool, but the antenna on the side of the trunk keeps me from attempting this... LOL.  You would find me curled up on my side, whimpering like a little girl... 

But I do step in from the right side.  For some reason my left thigh started cramping up once in a while when I got on from the left.  No problems since I started mounting from the right.  It's easier for me to go up and then gradually over and down, rather than up... and up... and up... and over!  And I don't scuff anything up this way, either.

Top of the page Bottom of the page
rainryder
Posted 2011-09-26 8:09 PM (#97804 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Tourer

Posts: 444
Bay of Gigs, WA
I mounted mine on a plaque and when I walk by the forks turn and it sings "Take me to the Dealer." I call it "Billy Big Bike."
Top of the page Bottom of the page
Mr Sug
Posted 2011-09-26 10:34 PM (#97819 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Cruiser

Posts: 117
Kansas City, MO
Getting on is easy - my problem is I dont want to get off
Top of the page Bottom of the page
dumpsterdave
Posted 2011-10-17 9:05 AM (#99232 - in reply to #97715)
Subject: Re: Found a way to mount my Vision...


Puddle Jumper

Posts: 45
Jax, FL
you put youir right foot in , you take your right foot out.....
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™