You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 5
| Seams they have changed the wiring for the GPS on teh '10. Its now a 5 pin connector, and diff. colors. Anyone have the page from a manual that tels which wire is for what? ANd or the type of connector now used. Its not the 7 pin AMP that was mentioned on another htread |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | John R,
I think you sent me a PM, but I can't find it now . . . anyhow, mine is a 2009, not a 2010. I do have a wiring diagram that one of the other members on the board sent me, but it only refers to 4 wires on the 2009 and that's what I hooked up to get everything going. I can sent it to you if you want, but I think they changed the wiring between those years and I don't want to create more confusion. BTW, I found it easier to just cut the plug off of the bike and solder on different connectors that you can get at walmart. I did try the Tyco mini amp connectors like the OEM's use but the pins and plugs were soooooo small and delicate that I went the walmart route. But you will need the 2010 wiring schematic. Good luck! |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
2010 GPS Wire Schematic
