You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Thanx Kevinx
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Hoss
Posted 2010-06-10 7:13 PM (#61921)
Subject: Thanx Kevinx


Puddle Jumper

Posts: 22
eastern NC
Well, drove down to Polaris of Gainesville (great dealership and staff) today to have Kevin put the cams in and dyno tune my Vision. Got it all done and took it for a short spin. Definite increase in power. Got it back to the in-laws and took it out for a longer ride (40 miles). All I can say is "WOW", what a huge difference! Numbers on the dyno were 106.9 HP 5300 rpm and 110.5 torque @ 4716 rpm. I was worried that my home-made pipes might affect the power, but after the dyno run, Kevin said the pipes "work!" . So, needless to say, I am extremely pleased with the outcome. Those of you that have the cams know what I am talking about and those of you that don't, don't know what you are missing! Thanx again to Kevin and the great staff at P of G. It was well worth the trip down there. These bug catching smiles are lasting longer and longer...hehe.
Top of the page Bottom of the page
XRsteve
Posted 2010-06-10 7:51 PM (#61925 - in reply to #61921)
Subject: Re: Thanx Kevinx


Visionary

Posts: 2300
Georgia, west of Atlanta
Sounds great, I gotta get down to Gainesville myself...................
Top of the page Bottom of the page
Hoss
Posted 2010-06-16 6:11 PM (#62408 - in reply to #61921)
Subject: Re: Thanx Kevinx


Puddle Jumper

Posts: 22
eastern NC
Well, I thought I was going to have to install velcro strips to affix my hands to the bars to keep from coming off the bike when cracking the throttle. Luckily, Utopia's backrest that I installed this past w/e helps keep me in the saddle eliminating the need for velcro.
Top of the page Bottom of the page
XRsteve
Posted 2010-06-16 8:07 PM (#62415 - in reply to #61921)
Subject: Re: Thanx Kevinx


Visionary

Posts: 2300
Georgia, west of Atlanta
Now that's what I'm looking for...................
Top of the page Bottom of the page
Jim
Posted 2010-06-16 8:07 PM (#62416 - in reply to #61921)
Subject: Re: Thanx Kevinx


Cruiser

Posts: 93
Saskatchewan (hard to say, easy to draw )
You have to pop the front wheel. First gear, up to about 3 grand RPM, back off and snap it! WOW! We did get a pic and video of Kevinx on my '08 MC with the front off the tarmac after cams in Minot. Congrats Hoss! Watch for speeding tickets.
Top of the page Bottom of the page
tralphaz
Posted 2010-06-16 9:28 PM (#62426 - in reply to #62416)
Subject: Re: Thanx Kevinx


Tourer

Posts: 353
Jim - 2010-06-16 5:07 PM

You have to pop the front wheel. First gear, up to about 3 grand RPM, back off and snap it! WOW! We did get a pic and video of Kevinx on my '08 MC with the front off the tarmac after cams in Minot. Congrats Hoss! Watch for speeding tickets.


You gotta post them, I wanna see it!!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™