You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




10.8 Lloydz Pistons
Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Vicbuilder
Posted 2011-01-21 11:32 AM (#77816)
Subject: 10.8 Lloydz Pistons


Cruiser

Posts: 169
The Vic Shop - Central Iowa		The stock bore/high compression pistons make a nice middle ground between "just cams" and the 114"-116" big-bore motors. Haven't heard alot of talk on these in a Vision - anyone else running them? After a long wait from Wiseco this Ness will be getting a little more umph next week. Stay tuned!



(11-19-10 [640x480].jpg)



Attachments
----------------
Attachments 11-19-10 [640x480].jpg (84KB - 1 downloads)
Top of the page Bottom of the page
nightvision
Posted 2011-01-21 11:46 AM (#77818 - in reply to #77816)
Subject: Re: 10.8 Lloydz Pistons


Cruiser

Posts: 156
dinwiddie, va		Let me know how this turns out. I have the new cams on order with bri for when they are ready. I am interested in the piston set too, if it makes good #'s. Keep us updated.

Nick Catlin
Top of the page Bottom of the page
Webhair
Posted 2011-01-21 1:07 PM (#77836 - in reply to #77816)
Subject: Re: 10.8 Lloydz Pistons


Iron Butt

Posts: 669
Peachtree City, GA		Looking forward to hearing the results...
Top of the page Bottom of the page
dr_reloader
Posted 2011-01-23 7:02 PM (#78000 - in reply to #77816)
Subject: Re: 10.8 Lloydz Pistons


Tourer

Posts: 537
, FL United States		+1
Top of the page Bottom of the page
Vicbuilder
Posted 2011-01-26 12:22 PM (#78189 - in reply to #77816)
Subject: RE: 10.8 Lloydz Pistons


Cruiser

Posts: 169
The Vic Shop - Central Iowa		Will be dyno'ing on Friday. I'll report back.
BTW I forgot that these are his new design which are 10.6 compression.



(pistons [640x480].jpg)



Attachments
----------------
Attachments pistons [640x480].jpg (55KB - 1 downloads)
Top of the page Bottom of the page
Vicbuilder
Posted 2011-01-28 3:52 PM (#78314 - in reply to #77816)
Subject: RE: 10.8 Lloydz Pistons


Cruiser

Posts: 169
The Vic Shop - Central Iowa		All done! What a fun bike to ride! 100ft/lbs @ 2500 - 110ft/lbs @ 3000. Lots of torque right in your usable riding range. Combo is as follows:
Lloydz 10.6 compression pistons
Lloydz intake plate
Lloydz VM1 cams
Lloydz VFCIII
Lloydz REV extend ECM
Parts and labor comes in around $3000.



(scan0003 - Copy [640x480].jpg)



Attachments
----------------
Attachments scan0003 - Copy [640x480].jpg (55KB - 3 downloads)
Top of the page Bottom of the page
dr_reloader
Posted 2011-01-28 6:15 PM (#78315 - in reply to #77816)
Subject: Re: 10.8 Lloydz Pistons


Tourer

Posts: 537
, FL United States		good.
Top of the page Bottom of the page
Jedi Jeff
Posted 2011-01-29 7:02 AM (#78335 - in reply to #77816)
Subject: Re: 10.8 Lloydz Pistons


Fountain Inn, SC United States		Rylan, what kind of pipes were on the bike?
Top of the page Bottom of the page
Vicbuilder
Posted 2011-01-29 8:02 AM (#78342 - in reply to #78335)
Subject: Re: 10.8 Lloydz Pistons


Cruiser

Posts: 169
The Vic Shop - Central Iowa		Jedi Jeff - 2011-01-29 7:02 AM

Rylan, what kind of pipes were on the bike?

Atom-Bombs
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™