You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Intercom background noise
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
team5150
Posted 2011-01-26 5:00 PM (#78207)
Subject: Intercom background noise


Cruiser

Posts: 104
Corona, CA
I have the stock CB/comm package on my 08 Vision and with the Atom Bomb pipes and the general noise of the engine/trans, the background noise while underway is very high.

When we are riding at anything but a 5th or 6th level cruise we have to turn the comm up to 15 to be able to hear each other. We don't even bother with the VOX setting because it has to be so high that we would have to shout to activate it. We just use the PTT switch when we want to talk.

What have others experienced with their units ? Is there a way to cut the background noise down ?

I thought my wing was noisy while riding on the freeway but this is far worse.

We have thought about going to the wireless units but I don't think that is the answer plus we would lose the CB and stereo.

Tom
Top of the page Bottom of the page
SYNSTR
Posted 2011-01-26 8:19 PM (#78217 - in reply to #78207)
Subject: Re: Intercom background noise


Iron Butt

Posts: 785
Mt. Vernon, WASH.
After decades of being around pneumatic drills, rivet guns, running jet engines (you really need to stand next to the gearbox on a running jet engine and 'feel' the gear train in your chest while you 'trim' or adjust the idle and power settings) and various racing engines from Nitro burning fuelers to MERLIN engines in hydroplanes, my hearing is shot so a few years ago I sprang for molded silicone ear plugs to keep the wind 'shreak' bearable while I ride. Now you can get them with all sorts or ear pieces including ipod and com types molded in and they comfortably fit your ear because they are molded to fit. They might be just what you are looking for.........
Top of the page Bottom of the page
hdfed
Posted 2011-01-27 4:03 PM (#78259 - in reply to #78207)
Subject: RE: Intercom background noise


Cruiser

Posts: 102
Orlando

Type of helemt?

Type of headset?  (OEM or J & M)

I find that the J&M headset unit is much better that the OEM.  Better sound and better mic.

 

Top of the page Bottom of the page
picard
Posted 2011-01-31 4:10 PM (#78468 - in reply to #78207)
Subject: Re: Intercom background noise


Cruiser

Posts: 111
Prairie Dog Heaven, CO
I have the J&M headsets and ride with earplugs under an Arai Profile. I almost don't hear the tranny at all with the earplugs - they attenuate this part of the spectrum exceptionally well. Music and intercom sounds great and I can just barely hear the low freq. exhaust pulses. Nice.
Top of the page Bottom of the page
Wizard523
Posted 2011-01-31 6:15 PM (#78476 - in reply to #78207)
Subject: Re: Intercom background noise


Tourer

Posts: 506
Woodland Hills, CA
I too have the molded silicone ear plugs wired with speakers and they work great. The ear plugs block out the wind and background noise, yet the intercom works perfectly. Having said that, I am not using the Vic intercom, but the Scala Rider bluetooth, so there may be a difference. When I want to listen to music, I just use the speakers, but even at highway speed, I only need to set it on about 12 to hear great.

Anyway, that's my experience.
Top of the page Bottom of the page
LIVV
Posted 2011-01-31 6:15 PM (#78477 - in reply to #78207)
Subject: Re: Intercom background noise


Nalcrest, FL United States
I don't think the background noise is any different than any other motorcycle as long as the exhaust isn't too loud. I have J&M headsets and I use the vox settings and it works well. You are on a motorcycle riding down a road. there will be noise in the background. I use mike covers from Cycle gadgets but they are no longer in business. They work well. Over all I think the CB/COMM. package on the Vision works very well.
Top of the page Bottom of the page
picard
Posted 2011-02-01 11:38 AM (#78524 - in reply to #78207)
Subject: Re: Intercom background noise


Cruiser

Posts: 111
Prairie Dog Heaven, CO
I have had three different comm systems over the years, BMW OEM, Baehr, and now the VV. The VV definitely has the best sound of the three. The Baehr system had superior VOX circuitry but the sound lacked. I very much like the VV system.
Top of the page Bottom of the page
rdbudd
Posted 2011-02-01 1:55 PM (#78533 - in reply to #78477)
Subject: Re: Intercom background noise


Visionary

Posts: 1632
Jasper, MO
LIVV - 2011-01-31 6:15 PM

I don't think the background noise is any different than any other motorcycle as long as the exhaust isn't too loud. I have J&M headsets and I use the vox settings and it works well. You are on a motorcycle riding down a road. there will be noise in the background. I use mike covers from Cycle gadgets but they are no longer in business. They work well. Over all I think the CB/COMM. package on the Vision works very well.


Yep. My exhaust is stock and it's going to stay that way. My SC is very loud. My touring bike is going to stay quiet. I have bought a lot of stuff from Cycle Gadgets, including the windsock deflectors. Too bad this economy did them in. I'm going to miss them. Another source for the deflectors: http://www.windsockwinddeflector.com/catalog.htm I haven't bought from these folks, but these are the same ones I got from Cycle Gadgets.

Ronnie
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™