You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Iron Butt
Posts: 721
| Yeah, that is from the guy who always stated he would NEVER make something unless it met HIS show quality standards, the same guy who stated that a tubular rack is a piece of junk not worthy of being on a $23K motorcycle and how dare you try to save some money on accessories when you paid $23K for a motorcycle. The guy had to find another high end money making business to support his extravagant lifestyle because the yacht sales business in Miami has dropped through the floor since 2007.
I guess he finally saw the light somewhat with regards to what 90% of Victory riders really want. I say somewhat because he still insists that cnc machining is much more costly than cnc waterjet cutting. He states that he isn't going to radius the edges and as a machinist I can tell you that radiusing the edges from one side is a simple matter of using a radius endmill versus a straight sided endmill and with the proper feeds and speeds you can obtain a near polished finish in aluminum parts. What he really hasn't figured out is that you can cnc waterjet cut the parts and then finish them on a cnc mill to get the best of both worlds and all it takes is making part holding fixtures. |
|
| |
|
Cruiser
Posts: 155
Stockton, California | Thanks for the info Michael. I will check it out. |
|
| |
|
Tourer
Posts: 554
2 mi from Jim Beam n KY | Unicorns, Leprechauns, and "bang for the buck" good value OEM Vision accessories don't exist! |
|
| |
|
Tourer
Posts: 444
Bay of Gigs, WA | Good stuff ain't cheap and cheap stuff ain't good! (That said, I can't wait 'till someday when these things are more common. Then it's "c'mon Craigslist!" |
|
| |
Jump to page : 1 2
Now viewing page 2 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
PRICEC FOR ACCOR.
