You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Lloydz icv
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Dwight
Posted 2012-03-21 7:06 AM (#110551)
Subject: Lloydz icv


Cruiser

Posts: 116
Last night I added Lloydz ICValve to my 09 Vision and all I can say if you are thinking of doing it..do it, I can not believe how much better the throttle feels. I am still tryin to get my tuner (VFC III) dialed in but I am getting close.
Also I wanted to ask about the exhaust pipe, I have done a search and what I see seems to be the norm on the Vision but, if I hold the rpm around 2500 or so on a cruise I have a very red pipe at the rear cylinder head? I know that it is very hot coming out of the cylinders and the pipe is a thin wall. I also have to believe that I am not runnin very lean which will cause this on a normal set up. I have the top filter, thrush exhaust and stage one on the bike. I also have my green set to 4 and yellow at 3 so I would not think it possible to be lean. Any thoughts would be helpful, thnks Dwight
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™