You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Rear brake and directional wire colors
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
mannymo
Posted 2015-03-08 11:26 AM (#170110)
Subject: Rear brake and directional wire colors


Puddle Jumper

Posts: 21
Hi guys,

I have a 2014 vision tour. Can someone please tell me the wire colors for the rear brake and directionals I need to tap into to add LEDS?
Pictures would be great!
Thanks,
Manny
Top of the page Bottom of the page
Davet
Posted 2015-03-08 11:44 AM (#170111 - in reply to #170110)
Subject: Re: Rear brake and directional wire colors


Puddle Jumper

Posts: 33
Sacramento, CA United States
Manny,

The common's BLACK/WHITE (BLACK wire with a WHITE stripe).
Left turn signal output's BLUE.
Right turn signal output's BLUE/RED (BLUE wire with a RED stripe).
Brake's WHITE or WHITE/PINK (depending on which lamp wire you're cutting into). Brake (or STOP as the manual refers to the indicator) WHITE wire goes to the MIDDLE STOP/TAIL LAMP while WHITE/PINK goes to the BOTTOM STOP/TAIL LAMP--take your pick.

When I added my LED license-plate frame to my '14 VV I double checked the wires leaving the associated lamp before I cut into the wire. The information I've provided is from the VV Service Manual (2008+ ). If you're going to replace the lamp with an LED and you're NOT using a plug-n-play (like MBW or exLED) then a trailer converter interface is recommended to "fake-out" the flasher's load requirements.

'ope this is the info. you're looking for....


Edited by Davet 2015-03-08 12:11 PM
Top of the page Bottom of the page
Rowebote
Posted 2015-03-08 11:49 AM (#170112 - in reply to #170110)
Subject: Re: Rear brake and directional wire colors


Cruiser

Posts: 62
Eagan, MN United States
If you're looking to add just an led strip to augment the current lights the directions for the 99 led mod or the instructions from ljurgens have the information. I added the lights per ljurgens instructions to my 14 and they work great. I'd take a pic but my bike is 3 1/2 hours south in Rylan's shop

Edited by Rowebote 2015-03-08 11:50 AM
Top of the page Bottom of the page
Davet
Posted 2015-03-08 12:44 PM (#170114 - in reply to #170110)
Subject: RE: Rear brake and directional wire colors


Puddle Jumper

Posts: 33
Sacramento, CA United States
From Manual:





(VV REAR LIGHTS.jpg)



Attachments
----------------
Attachments VV REAR LIGHTS.jpg (72KB - 7 downloads)
Top of the page Bottom of the page
mannymo
Posted 2015-03-08 2:51 PM (#170118 - in reply to #170110)
Subject: RE: Rear brake and directional wire colors


Puddle Jumper

Posts: 21
Thanks guys,
I knew I came to the right place.
Peace and ride safe,
Manny
Top of the page Bottom of the page
mannymo
Posted 2015-03-08 2:51 PM (#170119 - in reply to #170110)
Subject: RE: Rear brake and directional wire colors


Puddle Jumper

Posts: 21
Thanks guys,
I knew I came to the right place.
Peace and ride safe,
Manny
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™