|
|
Puddle Jumper
Posts: 44
Salt lake city Ut. | What is the average time for cam and vip install. 2011 bike if it matters |
|
| |
|
Fountain Inn, SC United States | At the AVR, Rylan Vos (The Vic Shop) did 5 cam installs in one 8 hour day and he was cookin! I'd figure it's generally a 1.5 - 2 hour job. The VIP is simple. It's the cams that take time. |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | Good luck finding the cams.  |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | Rylan did mine in just under 2 hrs. Now waiting in line for dyne tune . . . That's another story, but when it leaves the truck, it is right! |
|
| |
|
Visionary
Posts: 4278
| I would be interested in seeing how much body work they take off and and what they do to take the rocker boxes off |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | If I did the work it would take three "eight hour" days and it may never run again.
If you are Lloyd, Kevin Cross or Rylan Vos it would take two and a half to four hours.....maybe more as needed. But it will be done right! |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | None of the bodywork was removed. I do think he loosened up my RH floorboard though. Saw him replace the rocker boxes, but not remove. Drive on down to DES Moines area and Rylan can hook you up
Edited by Man314 2011-08-27 12:58 PM
|
|
| |
|
Iron Butt
Posts: 1109
| ScoreBo - 2011-08-26 3:09 PM
Good luck finding the cams.
Thats the problem lol. But I'm sure Lloyd will find a supplier to keep up with demand. |
|
| |
Install times cams
