You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 26
Milwaukee, WI United States | I want the running lights on my 2011 Vision Tour to blink with the turn signals and flashers. I don't want them to work with the brakes because I already have the 99led strip doing that. I've searched and found some old threads on this but they were for early model Visions. Also, the links to instructions no longer worked. Can anyone point me to a mod instruction, thread, or product that I can reference to accomplish this? Thanks, |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | I pulled my first Vision apart in 2008 thinking I was going to replace the bulb with a dual filament. It uses a tiny push in, like a marker light. When I replaced that with another Vision I bought used the previous owner had replaced with LED and was running a 4710 controller. They were VERY dim as running lights. I believe the 4710 controller will do it with the stock bulbs.
Now I'm just running the Stingerz 99 LED strip with a duel intensity control in line. Works great. |
|
| |
|
Cruiser
Posts: 92
Moncks Corner, SC United States | Look up info on the Kuryakyn 4710 module. I have this installed, and have my trunk running lights working as brake lights and turn signals along with my 99 led strip (which I cut in half) |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
I want to turn trunk lights into blinkers on a 2011 Vision Tour
