|
|
Puddle Jumper
Posts: 7
Endicott, NY 2011 Vision | Would there be a 90 degree angled valve stem available for a 2010 Vision? I`ve seen them for other bikes but I can`t find any for my ride. Any help would be most appreciated. Thanx. |
|
| |
|
Visionary
Posts: 4278
| Look up your valve stem size hole or ask your dealer he'll have to order them for you any how.
I looked high and low and could not find the stem size. Dam |
|
| |
|
Cruiser
Posts: 117
Kansas City, MO | let us all know
|
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | my understanding is that they are made, but you have to be careful with them. They need to be the steel type, and not rubber type because the rubber will give away and split from the centrifical force. That's all I really know. |
|
| |
|
Visionary
Posts: 3204
Memphis | Same as a Goldwing. 0.453" or 11.3mm. These are popular with Wingers - http://wingstuff.com/pgroup_detail/26903_chrome_metal_valve_stem_fits_gl1500_gl1800_most These are top of the line - http://kurveygirl.com/shop/index.php?cPath=27 Be advised, both are sold as singles. $16/pair and $58/pair. Just Google Goldwing 90 degree valve stems for more choices. |
|
| |
|
Cruiser
Posts: 131
Edmond, OK 2012 Vision, 2012 Cross Country | My dealer ordered mine for me. I only put it on the rear wheel. It is also made of steel. You dealer will be your best source for getting one for you. Good luck. |
|
| |
|
Tourer
Posts: 324
New Orleans, La, | I do all of my own wheel/tyre work myself and bought my 90 stems from the same company that I bought the tyre machine from. Look up any tyre repair supply company that has motorcycle tyre supplies and they will have them. I'm 99.9 percent positive that valve stem size for motorcycles is standardized and not model specific anyway. |
|
| |
90 degree valve stem for Vision???
