You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 42
Prescott, AZ | Where does the black wire go? The instructions say to connect to a "good ground source". Does that mean the black wire connected to the existing plate light bulb or do I need to find a piece of metal to screw it on to? Thanks. |
|
| |
|
Cruiser
Posts: 233
flagstaff, AZ | black wire should be fine,. |
|
| |
|
Cruiser
Posts: 74
Navarre, FL | I tapped mine into the existing wires using the posi-taps. Works great. |
|
| |
|
Puddle Jumper
Posts: 42
Prescott, AZ | Thanks. |
|
| |
|
| PM me you address and I will send you some posi-taps. Will send you copy of that page/s of service manual if that helps. |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Did you have to remove the trunk and painted v-panel to access the light wires? |
|
| |
|
| When I do the installs here...I remove trunk and M panel to access wires. Drill small hole in existing lens or M panel to feed LED frame wires thru. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
NOEMTZ vision lighted license plate frame
