You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Visionary
Posts: 1632
Jasper, MO | wrk24wheel - 2012-04-20 8:02 AM
kris1956 - 2012-04-20 3:38 AM
I didn't know Dynojet could extend it to 6400, mines at 6k. I'll have to give them a call. Thanks
The Victory model comes preset at 6000 RPM, anything above that requires the liability release and a new code that will set the PC V to the new limit. You just need to provide them with the SN of your PC V and they generate a new code that you plug into the software. Pretty simple and works great. Got the code back the same day I sent the release back to them.
Just curious. I know the rev-limit is increased in gears 1 through 5. What about 6th? The 120 MPH speed limiter is a function of the stock ECU being programmed to an RPM limit of 4550 when it gets the signal from the gear indicator that the bike is in 6th gear. Does the PC V get around that too?
Goldwings can do 129MPH. Some of them like to brag about that. Gotta show 'em who's the boss. I'm running Lloydz VFCIII and ECU. No problem showing them who's the boss.
Ronnie |
|
| |
|
Puddle Jumper
Posts: 45
Ventura County, CA | rdbudd - 2012-04-20 10:04 AM
wrk24wheel - 2012-04-20 8:02 AM
kris1956 - 2012-04-20 3:38 AM
I didn't know Dynojet could extend it to 6400, mines at 6k. I'll have to give them a call. Thanks
The Victory model comes preset at 6000 RPM, anything above that requires the liability release and a new code that will set the PC V to the new limit. You just need to provide them with the SN of your PC V and they generate a new code that you plug into the software. Pretty simple and works great. Got the code back the same day I sent the release back to them.
Just curious. I know the rev-limit is increased in gears 1 through 5. What about 6th? The 120 MPH speed limiter is a function of the stock ECU being programmed to an RPM limit of 4550 when it gets the signal from the gear indicator that the bike is in 6th gear. Does the PC V get around that too?
Goldwings can do 129MPH. Some of them like to brag about that. Gotta show 'em who's the boss. I'm running Lloydz VFCIII and ECU. No problem showing them who's the boss.
Ronnie
Unfortunately, I personally have not had the chance to test this since installing the cams and PC V. Not enough long straight aways near me to try that out on this bike. V-rod yes, Vision no. |
|
| |
|
Iron Butt
Posts: 1109
| From what I've read, dynojet does not extend the top end speed. |
|
| |
Jump to page : 1 2
Now viewing page 2 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
cammed
