|
|
Cruiser
Posts: 108
Conneaut, OH | If you really want vents why not remove the panel and take it to a hot rod shop and have them louver it? |
|
| |
|
Cruiser
Posts: 209
| here's a thought witchdoctor. #1 when you open the side compartment, in the upper right corner ,ther is a roughly 3x4" useless space. how bout a plastic door or insert to store smaller items? correction. this space is in upper-forward part of side compartment. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | 10 minutes with a piece of plastic and a dremel would take care of that. Use the other side as a template. I'm all for giving Jon as much business as possible but that seems like it would take more work than it would be worth. How much would YOU pay for something like that? |
|
| |
|
Visionary
Posts: 1228
Rancho Cucamonga, CA | Here is your template.
I used a $2 plastic trash can and a pair of scissors.
Edited by Nozzledog 2012-12-03 2:05 AM
(2012-03-05 11.06.57-picsay.jpg)
(2012-03-05 11.05.53-picsay.jpg)
Attachments
----------------
 2012-03-05 11.06.57-picsay.jpg (66KB - 4 downloads)
2012-03-05 11.05.53-picsay.jpg (60KB - 4 downloads)
|
|
| |
|
Cruiser
Posts: 128
| i WILL CHECK IT OUT. WE ARE MAKING HANDLEBARS NOW.
TO FOLLOW UP- THE QUICK RELAEASE TRUNK IDEA- NO GO. THERE IS NOT ENOUGH SPACE DOWN IN THE HOLE TO PUT WING NUTS OR ANYTHING LIKE THAT. JUST TO MUCH WORK TO DO IT ANY BETTER THAN WHAT THE FACTORY HAS. |
|
| |
|
Tourer
Posts: 323
N. Miami, Florida | witchdoctor - 2012-12-03 6:27 PM
THE QUICK RELAEASE TRUNK IDEA- NO GO. THERE IS NOT ENOUGH SPACE DOWN IN THE HOLE TO PUT WING NUTS OR ANYTHING LIKE THAT. JUST TO MUCH WORK TO DO IT ANY BETTER THAN WHAT THE FACTORY HAS.
So who's isn't coming out? ROFLMFAO!
|
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | Whose what isn't coming out of what?? You confused me. |
|
| |
|
Iron Butt
Posts: 1109
| conn-e-rot - 2012-12-02 12:46 PM Vents are already out there guys.... http://www.napalmmotorsports.com/custompage2.asp?pg=custom personally I think it's ugly but to each their own ugly +1 |
|
| |
|
Cruiser
Posts: 128
| How about a plug n play louder horn? |
|
| |
|
Cruiser
Posts: 108
Conneaut, OH | I didn't think my horn was too bad it's way better than the XC horn |
|
| |
|
Cruiser
Posts: 215
W'ford Tx | witchdoctor - 2012-12-04 1:31 PM
How about a plug n play louder horn?
If you can cut and strip the 2 factory wires they're all plug and play. Not to terribly hard. I swapped out to an air horn and can send you pics of the install if you need it. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | If you add an air horn (like the Wolo or Stebel), you MUST use a relay. If not, you'll fry your horn wiring. |
|
| |
|
Visionary
Posts: 1365
Central Maryland | How about...
...some sort of stylish mud flap for the rear tire? A lot of road grime gets kicked up all over the lower vertical rear of the Vision. |
|
| |
|
Cruiser
Posts: 128
|
If you can cut and strip the 2 factory wires they're all plug and play. Not to terribly hard. I swapped out to an air horn and can send you pics of the install if you need it.
JWITCHDOCTOR@AOL.COM THANKS! |
|
| |
|
Cruiser
Posts: 128
| willtill - 2012-12-06 6:24 AM
How about...
...some sort of stylish mud flap for the rear tire? A lot of road grime gets kicked up all over the lower vertical rear of the Vision.
I WILL CHECK IT OUT. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Take over MBW's tail light idea. Maybe you can bring it to market. They can't seem to............. |
|
| |
|
Tourer
Posts: 430
| How about a front fender flap as well as a rear? |
|
| |
|
Visionary
Posts: 1365
Central Maryland | XRsteve - 2012-12-06 8:36 AM
Take over MBW's tail light idea. Maybe you can bring it to market. They can't seem to.............
Agree! +1 |
|
| |
|
Cruiser
Posts: 128
| We have a tail light idea in the works, nothing like the MBW one though. Its just an idea right now and with all the other projects you guys are asking for I doubt it will be this year. |
|
| |
|
Puddle Jumper
Posts: 36
coweta ok | front fork bottom covers, axle covers, package of 6 black windshield bolts fo the vision, not 4 like for the the x bikes. p.s. merry christmas to me and send me 2 more :-) front and rear mud flaps, something to replace passenger floorboards for single riders. Marty |
|
| |
|
Puddle Jumper
Posts: 13
| How about an abs cover to replace that UGLY peice of black plastic on the left side near the oil cooler. It would look good in chrome! |
|
| |
|
Cruiser
Posts: 128
| We already have the 6 bolts for the windshield. Have front axle caps too.
The mudflaps is something I will look into. |
|
| |
|
Cruiser
Posts: 215
W'ford Tx | plus a billion on the rear mudflap. plus a billion and one if you can have the chrome trucker girl on the back of it. |
|
| |
|
Cruiser
Posts: 128
| goat813 - 2012-12-10 10:15 PM
plus a billion on the rear mudflap. plus a billion and one if you can have the chrome trucker girl on the back of it.
LOL DOES SHE HAVE TO BE NAKED? HOW ABOUT A SET OF BULL BALLS! |
|
| |
|
Cruiser
Posts: 108
Conneaut, OH | I can not believe no one has requested the skid plate |
|
| |
Witchdoctor's- I want your ideas!
