|
|
Cruiser
Posts: 78
Gilroy, Ca | So it took me 2.5 hours to install them. The final result was 6.5" up and 2" foward |
|
| |
|
Cruiser
Posts: 78
Gilroy, Ca | Pictures on my phone are too large to post |
|
| |
|
Puddle Jumper
Posts: 26
| Go to photobucket, upload ur pics and then "resize" your images... |
|
| |
|
Puddle Jumper
Posts: 12
| I also put Apes from Ness on my vision here are a few pics.
(front view.jpg)
(rear view.jpg)
(side view.jpg)
Attachments
----------------
 front view.jpg (72KB - 6 downloads)
rear view.jpg (15KB - 6 downloads)
side view.jpg (50KB - 4 downloads)
|
|
| |
|
Cruiser
Posts: 216
Danville, CA | Love mine too.... |
|
| |
|
Cruiser
Posts: 70
Iowa | I'M interested in doing this mod, can I see more pics. maybe some pics with you on the bike? to show the reach. do you have to cut any wires or change cables? thanks |
|
| |
|
Cruiser
Posts: 103
Duanesburg N.Y. | just curious, are your hands in the wind or does the faring still give some protection. I ride when its real cold out and this will be an issue Eric |
|
| |
|
Puddle Jumper
Posts: 5
Kalama, WA | vision4me - 2013-03-29 4:47 AM
Do you have to cut any wires or change cables? thanks
+1, I also would like to see this answer. When I called Ness they told me "Yes". |
|
| |
|
Cruiser
Posts: 216
Danville, CA | Hands in wind... Only drawback.... Lovem |
|
| |
|
Visionary
Posts: 4278
| Think about this with your hands that high up and your foot slips on the sand or you tricky situation are you strong enough to handle 800 pounds.
The higher your hands and arms are the less strength you have |
|
| |
|
Cruiser
Posts: 70
Iowa | I put apes on my vision and wanted to update this thread. I'll start with a answer to my own question. I did not have to cut any wires, the clutch cable is long enough, just reroute it and bleed the clutch. I did order a longer cable for the brakes, I took the bolt out that holds the cable to the forks so I could ride the bike. its still tight, so order a cable first. you will need a extra set of hands to hold the bars and start the bolts. other than that its easy to do. I don't have many miles on them yet so can't give a good review. I do like the way they feel. I'll update after new cable install and a good long ride. thanks |
|
| |
|
Puddle Jumper
Posts: 7
Allen , TX | Some say you need longer brake cables and some say just turn the banjo forward or backward . So do you need longer cable or not? Bars will be here Thursday. |
|
| |
|
Puddle Jumper
Posts: 8
| I'm 5'7" and I'm looking at the HMD520 Apes. Is there anyone that's a little shorter that has them and likes them? I like the idea of having my hands up but am concerned with the 2" forward, sounds like a real stretch. |
|
| |
|
Puddle Jumper
Posts: 23
| I can't think of a better way to bugger any motorcycle, particularly a bike like a Vision than to put a stupid looking set of ape hangers on it, but if you fellers like them thats all that counts.
Ridesafe.
|
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | Thought many times to go with apes. I need it for the comfort for the longer rides. Thanks for sharing the information. |
|
| |
Ness Apes for Vision with Pictures
