You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




loyds top filter and atw
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
gary1
Posted 2013-06-30 9:01 PM (#141095)
Subject: loyds top filter and atw


Puddle Jumper

Posts: 43
just installed top filter from Lloyds and atw seem to have alittle bit more getty up .Lloyds said should be ok shouldn't have to reprogram ecm seems torun fine no popping on decellereation. stock pipes.still getting us to the extra air and valve noise. any body else use this combo 2012 vv 5800 k put 250 on today.what do youy think .
Top of the page Bottom of the page
Tims_11Vision
Posted 2013-07-01 9:57 AM (#141113 - in reply to #141095)
Subject: Re: loyds top filter and atw


Cruiser

Posts: 143
Lexington Park, MD
Got a buddy running your combo and very happy to have a better response 2000-3000 rpm, gettin mid 40s mpg. I added the VFCIII before the ATS and over 3k it makes you smile! The ATS really complimented the lower end and I'm happy with the combo. I'd keep an ear out for poppin and unplug the o2s for that and not sure what your on for fuel but absolutely 91 needed after I did mine.
Top of the page Bottom of the page
JS5Owner
Posted 2013-07-01 10:07 AM (#141116 - in reply to #141095)
Subject: Re: loyds top filter and atw


Cruiser

Posts: 231
Desert Hot Springs (Palm Springs area), CA
Here in my signature is my setup...  I do feel the extra pull and found that keeping the rpms above 3k when shifting eliminates any popping.  Avg 41-42 mpg.

Edited by JS5Owner 2013-07-01 10:09 AM
Top of the page Bottom of the page
wingit3611
Posted 2013-07-01 11:45 AM (#141124 - in reply to #141095)
Subject: Re: loyds top filter and atw


Cruiser

Posts: 244
JS5Owner: "VFC III (settings @1|3.5|0|0|3.5|4) O2 unplugged"
WHY the Red of 0 & the Red/Blue of 4? A type or is that hat you have? Why? unusual.
Top of the page Bottom of the page
Nozzledog
Posted 2013-07-01 1:14 PM (#141128 - in reply to #141095)
Subject: Re: loyds top filter and atw


Visionary

Posts: 1228
Rancho Cucamonga, CA
Cruising around this week in the 109F heat, I started getting a little pinging pulling hills around 3k rpm in 6th gear. Otherwise the ATW set at +4 has been great. With the PCV, I might try adding a little r3tard as the rpms go up.
Top of the page Bottom of the page
JS5Owner
Posted 2013-07-02 12:27 AM (#141158 - in reply to #141124)
Subject: Re: loyds top filter and atw


Cruiser

Posts: 231
Desert Hot Springs (Palm Springs area), CA

wingit3611 - 2013-07-01 11:45 AM JS5Owner: "VFC III (settings @1|3.5|0|0|3.5|4) O2 unplugged" WHY the Red of 0 & the Red/Blue of 4? A type or is that hat you have? Why? unusual.

I found these settings here: http://forums.thevmc.com/bb/forums/thread-view.asp?tid=85419&start=1&highlight=Lloydz+VFC-III+Atom+Bomb&highlightmode=1

So far they have worked well for me.  Honestly I haven't tried bumping up the Red.  

Since then I found KevinX's way to manually do it and would like to try it as well.

"Start with all the setting off or to the left.

Find a nice clear “closed course” to do the setting on.

GREEN:

Run steady at 30 mph in second gear. Add fuel to the green until the surging stops, then add one full point

YELLOW:

Run steady at 30 mph in second gear. Smack the throttle and concentrate on the acceleration feel. You should notice it getting better as you add yellow. Keep adding yellow until the acceleration feels mushy, then back off one full point from that setting.

RED:

Generally green plus one full point. If you want to play with it beyond that, try running at 60 mph in third gear. Do a hard roll on and concentrate on the way it pulls and how hard it pulls.

GREEN-BLUE:

Leave off. If you have read Lloyd?s instructions you know what this setting does and if you need it or not.

RED-BLUE:

Generally 2.5 to 3.

YELLOW-BLUE

 

Generally 2.5 to 3."

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™