You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




HID Replacements from victoryhid.com or other?
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
alohaboy
Posted 2013-08-01 3:38 PM (#142360)
Subject: HID Replacements from victoryhid.com or other?


Cruiser

Posts: 216
Danville, CA
Hey Guys,

Anyone install these HID light sets from VictoryHID.com or others?

Curious of feedback, quality, bulb life,etc?

Any feedback or ideas is helpful?

Ride Safe Gang!!!

Top of the page Bottom of the page
ByteN2it
Posted 2013-08-01 8:08 PM (#142369 - in reply to #142360)
Subject: RE: HID Replacements from victoryhid.com or other?


Tourer

Posts: 482
Beer Collins, Colorado (there is no fort)
I got mine here - http://www.ddmtuning.com/Products/DDM-35W-55W-Dual-Motorcycle-HID-K...
I went with the 55w 5000K kit on my vision & I'm very pleased with the set up. I have an ongoing issue with Victory HID and have confronted him on several occasions asking him to prove to me that he's not selling the DDM kits at twice the price or more. I believe his kits are only 35W. I feel he's fleecing the flock and will not respond to me. If you want to pay a 100% or more mark up go with the Victory HID, many folks are very happy with what they got-I don't mind a guy making a profit but but geez. The DDM kit was about $80 and I have close to 10,000 miles on and everything's working great-I had a thread on here showing some of the install if you do a search-good luck
Top of the page Bottom of the page
alohaboy
Posted 2013-08-01 8:31 PM (#142370 - in reply to #142360)
Subject: RE: HID Replacements from victoryhid.com or other?


Cruiser

Posts: 216
Danville, CA
Awesome input!!!! Thank you!!! Since I am a stickler for uniformity and drive with all 3 lights on at all times for safety and awareness, I plan on replacing all 3. Did you replace all 3? The bulb type is H4 right for all 3?

Appreciate your help and safe riding..

Top of the page Bottom of the page
ByteN2it
Posted 2013-08-01 9:13 PM (#142373 - in reply to #142360)
Subject: Re: HID Replacements from victoryhid.com or other?


Tourer

Posts: 482
Beer Collins, Colorado (there is no fort)
My Vision already had the HID cyclops light so I'm not sure what bulb it would replace with or where to tuck the ballast. I don't even bother turning it on any more the duals are so bright it doesn't add anything-it's just an emergency back up now.
Top of the page Bottom of the page
LRojas
Posted 2013-08-05 9:40 PM (#142600 - in reply to #142360)
Subject: Re: HID Replacements from victoryhid.com or other?


Puddle Jumper

Posts: 7
Gulfport, MS
I haven't made that jump yet, I will though, but I do know that yes they are H4/9003 for the upper two and HS1 for the cyclops (but an H4/9003 is the same pin pattern, just that one of the HS1 tabs is slightly thicker)
Top of the page Bottom of the page
Travler
Posted 2013-08-06 7:26 PM (#142638 - in reply to #142360)
Subject: RE: HID Replacements from victoryhid.com or other?


Puddle Jumper

Posts: 37
SE Florida
The Factory HID bulb for the vision ($287 from Victory) is a D1R and can be found on ebay for less than $25 I recently had to replace mine had to tear the whole front of the bike off to get the bulb back in what a pain.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™