You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
New user
Posts: 2
| My 08 Vision had at least an inch of play in the handlebars. Following TXVision's tricks I was able to replace the upper and lower bushings. A bit of a challenge to torque. Rock solid now.
Many thanks to TXVision |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | I'm planning on replacing the handlebars for aftermarket this winter. I have a '12 and it will have less than 10k miles when I swap out the bars. Any reason I should (or should not) replace the bushings while I'm at it? How long do they normally last? |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Grey Goose - 2013-08-21 9:27 PM
My 08 Vision had at least an inch of play in the handlebars. Following TXVision's tricks I was able to replace the upper and lower bushings. A bit of a challenge to torque. Rock solid now.
Many thanks to TXVision
If you had a chance to compare the old bushings with the new, were they physically worn or were the bolts loose? (torque issue)
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Handlebar bushing replacement
