You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 24
Dallas, NC United States | Just finished cb install on 2013 vision. Here are couple things that can save time. Headset jack holes are 11/16 diameter. You can use a 11/16 spade drill for wood on the plastic for the passenger headset. The driver headset jack requires drilling in the aluminum. So I went to Harbor Freight and bought a step drill goes from 1/4 to 3/4 diameter, even has 11/16 marked on it part number 44460 cost $5.99. This will help ALOT! |
|
| |
|
Cruiser
Posts: 78
| KRUZER - 2014-02-09 8:18 AM
Just finished cb install on 2013 vision. Here are couple things that can save time. Headset jack holes are 11/16 diameter. You can use a 11/16 spade drill for wood on the plastic for the passenger headset. The driver headset jack requires drilling in the aluminum. So I went to Harbor Freight and bought a step drill goes from 1/4 to 3/4 diameter, even has 11/16 marked on it part number 44460 cost $5.99. This will help ALOT!
How long did it take you and did you encounter any hiccups? Instructions adequate? |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
CB Install
