|
|
Puddle Jumper
Posts: 14
| Can a Garmin 590 GPS be installed on a 2010 or later Vision painlessly? I know the 660 works, but the 590 seems to be a better upgrade. Just wondering if the pinouts are the same, uses the same mount as the 660? Is there a Vision compatible mount/interface for the 590?
If not, has anyone done a Vision install of a 590? What did you have to do to make it work properly through the radio, etc ? ?
Thanks! |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | Got mine today. The 590 will NOT fit in the 660 cradle.
|
|
| |
|
Cruiser
Posts: 135
Chesterfield, VA | LA Victory Rider - 2014-06-06 12:49 AM Got mine today. The 590 will NOT fit in the 660 cradle. Yeah, I noticed that when I was looking at the 590 on-line. However, it appears that the 590 cradle would bolt onto the Victory mount the same as the 660 cradle with the plug connection at the bottom of the cradle. If this is true (and I'm not sure it is) the hook-up would be as simple as removing one cradle and attaching the new one to the mount. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Let us know , I'd like one if it works as great as I think it might.............. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | I used it in my car last night. I think it will be pretty sweet. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | So I had to cut/ splice and tap into the harness to connect into the wire harness on the bike. Used the same 4 wires from the bike that my Zumo 660 used. Not that hard to do. Just go to remove the radio console.
Sorry, didn't take pictures. |
|
| |
Garmin 590LM GPS on a 2010 and later Vision?
