|
|
Tourer
Posts: 341
West Salem, WI United States | Anyone have thier old stock Vision mirrors that they've take off and are not using? I'm looking to do an LED project, adding in the arrows behind the mirror and don't want to destroy mine trying to work this out ;-) |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Saw a video on youtube where a guy explains how to do it. Will be a nice mod! Good luck.
http://www.youtube.com/watch?v=6w1rSyNBmVU
Edited by nailer 2014-05-22 5:13 PM
|
|
| |
|
Visionary
Posts: 4278
| here is a kit http://shop.muthco.com/victory-vision-signal-mirror |
|
| |
|
Tourer
Posts: 341
West Salem, WI United States | johnnyvision - 2014-05-22 6:00 PM here is a kit http://shop.muthco.com/victory-vision-signal-mirror I'm sure those are nice, but I just want the OEM mirrors to mount my own LED's to. There is some cutting to do and I wanted to do it on a second set of mirrors just in case I screw anything up ;-) |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | If you happen to break the mirror glass any auto glass company can easily cut you new mirrors. Probably will run aprox $35-$50 easch. |
|
| |
|
Tourer
Posts: 341
West Salem, WI United States | Maybe I'll try to remove the glass on mine. I'll heat up the back of the plastic to release whatever is holding them on, I'm guessing silicone or 3M type tape. |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | ljurgens, let us know how the glass comes off! |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | ljurgens, let us know how the glass comes off! |
|
| |
Looking for removed mirrors
