|
|
New user
Posts: 3
Mt Pleasant, IA United States | I removed the Garmin mount from my Vision and I was wondering if anyone else has and if they did what did they use to plug or cover the holes?
Thanks
Dean |
|
| |
|
Puddle Jumper
Posts: 44
Houston, TX United States | When I purchased my VV previous owner had a key fob attached to the key, and left a small circular mark on the panel.
I got a Victory Badge Logo and stuck it just below the ignition, covered up the mark and looks cool, will upload pics when able. |
|
| |
|
Puddle Jumper
Posts: 28
Lynnwood, WA United States | zemog - 2014-06-23 6:20 PM
I removed the Garmin mount from my Vision and I was wondering if anyone else has and if they did what did they use to plug or cover the holes?
Thanks
Dean
Here is the part number for a new one in Black: 5251418-266 Console, Bridge, Upper Radio, Black
It is also available in brushed aluminum. Sorry, I don't know the price...
Terry |
|
| |
|
Visionary
Posts: 4278
| Hardware store would have plastic hole plugs |
|
| |
|
Cruiser
Posts: 178
LaGrange, GA | I took the Garmin cradle off of the aluminum mount, then found that one of these mounts right to it -- http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/...
Using that, a short arm, and x-grip phone holder I now have my phone right where my garmin used to be. I painted the base bracket with black plasti-dip so it would match the ram bits. Since it's RAM, I could feasibly use the spot for another GPS, or a GoPro, or whatever if I got the urge. Here are a couple of pics.
BTW, I have the holder offset because of the placement of the buttons on my phone - the phone itself is centered when in place.
Edited by BrandonM7 2014-06-25 12:51 PM
|
|
| |
|
Visionary
Posts: 4278
| do a vinyl wrap on the hole dash. Then you would not have reflection in windshield |
|
| |
|
Cruiser
Posts: 135
Yellowknife, NT Canada | Any of the RAM mounts with the AMPS hole pattern will fit the holes in the Victory mount. The RAM-B-347 works just fine and give a 1" RAM ball to mount a new GPS, or any other item to.
|
|
| |
|
Puddle Jumper
Posts: 37
SE Florida | I still have the silver dash I removed when I put on a black dash if you are interested I would probably part with it. |
|
| |
|
New user
Posts: 3
Mt Pleasant, IA United States | Hey thanks for all the ideas. What I did for now is I found two chrome plugs at True Value at $1.19 ea. They had all different size's for different holes. For a final fix I have thought about the decal but I am leaning more toward the pt#2879418 gas tank logo for a Kingpin. As soon as I get to a Victory dealer I will check and see if it fits and how it looks. I will let you know and send pictures. Again thanks for all the suggestions.
Dean
2013 Victory Vision Gloss Black |
|
| |
|
Puddle Jumper
Posts: 44
Houston, TX United States | Here's a pic of my, Victory Logo...
(photo (2).jpg)
Attachments
----------------
 photo (2).jpg (42KB - 1 downloads)
|
|
| |
|
New user
Posts: 3
Mt Pleasant, IA United States | Fmorin05 - 2014 06-30 6:09 PM
Here's a pic of my, Victory Logo...
Since the badges come in pairs do you happen to have the other one that you would like to sell?
Dean |
|
| |
|
Puddle Jumper
Posts: 44
Houston, TX United States | Yes will sell not a problem we just need to figure out how to do this. |
|
| |
Removed Garmin Mount
