You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




chrome tipovers questions?
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
airguy
Posted 2008-09-02 1:12 PM (#17412)
Subject: chrome tipovers questions?


Cruiser

Posts: 175
Hinton, Iowa
I see in the 09 vic catalog the show a set of chrome rear tip over covers.
Does anyone have these yet/ Are they plastic or what? I have thought I might
take mine to get chromed this winter if they aren't to hard to get off. But if these
covers. were a good deal and not a piece of sh@*t then I might just order a set now.
All opinions welcome. Thanks, Mike
Top of the page Bottom of the page
Indiana RoadRunner
Posted 2008-09-02 8:14 PM (#17433 - in reply to #17412)
Subject: RE: chrome tipovers questions?


Tourer

Posts: 332
Dale, Indiana
I ordered a set.
On backorder until October.

We'll know then.




Top of the page Bottom of the page
TimS
Posted 2008-09-02 9:36 PM (#17435 - in reply to #17412)
Subject: RE: chrome tipovers questions?


Iron Butt

Posts: 810

Mike,

Your chrome guy needs to be real good at his trade.  The rear tip over protectors are a cast piece made of a very porous material.  I had mine chromed and they came back pitted by the porous base metal.  I have seen others that were chromed and they didn't turn out well either. 

The best I have seen is at CycleDragon in Cerritos.  Their chromer does a triple marine grade chrome (I guess the type for salt-water marine applications).  Their tip overs came out like a mirror with no pitting.  If I have mine cleaned up, I will take it to them for a re-chrome.

Sincerely,

Tim

Top of the page Bottom of the page
Arkainzeye
Posted 2008-09-02 9:45 PM (#17439 - in reply to #17412)
Subject: Re: chrome tipovers questions?


Visionary

Posts: 3773
Pittsburgh, PA
I was just wondering about the chrome tip over covers. Im glad i didnt order them yet. Since they are on back order. A few weeks ago i ordered the Chrome mirror trim and i was told the samething. Back order until October. So far i have ordered two things from Victory that needed to be returned. 1) the cup holder mount. 2) the floorboard risers. With the floorboard risers the box looked all scratched up, and when i opened it there was only ONE riser in there.. lol I called my victory dealer and said WTF is going on with their accessories. btw the chrome pieces for the rear brake res cover and the rear trunk keyhole cover is PLASTIC.... Looks good. I was just a little shocked to see they were plastic. No biggie.
Top of the page Bottom of the page
TimS
Posted 2008-09-02 9:52 PM (#17441 - in reply to #17439)
Subject: Re: chrome tipovers questions?


Iron Butt

Posts: 810

Arkainzeye - 2008-09-02 6:45 PM  ... btw the chrome pieces for the rear brake res cover and the rear trunk keyhole cover is PLASTIC.... Looks good. I was just a little shocked to see they were plastic. ...

The chrome rear valance and the chrome front fender accent are also chrome.  I forget if the rear engine mounts are plastic or not.

Also, the lower brake master cylinder cover is held on by silicone, no mechanical fasteners.

Top of the page Bottom of the page
Arkainzeye
Posted 2008-09-02 10:38 PM (#17447 - in reply to #17441)
Subject: Re: chrome tipovers questions?


Visionary

Posts: 3773
Pittsburgh, PA
TimS - 2008-09-02 9:52 PM

Arkainzeye - 2008-09-02 6:45 PM  ... btw the chrome pieces for the rear brake res cover and the rear trunk keyhole cover is PLASTIC.... Looks good. I was just a little shocked to see they were plastic. ...

The chrome rear valance and the chrome front fender accent are also chrome.  I forget if the rear engine mounts are plastic or not.

Also, the lower brake master cylinder cover is held on by silicone, no mechanical fasteners.



yeah when i installed my rear brake res cover, i believe they said to let the silicon sit for at least 24 hours before riding the bike. I was very shocked with how it was going to mount to the bike.. but it works..
Top of the page Bottom of the page
cjnoho
Posted 2008-09-02 11:42 PM (#17451 - in reply to #17412)
Subject: Re: chrome tipovers questions?


Visionary

Posts: 1324
So Cal
Non-metalic parts are chromed by first, chemically bonding a layer of copper to the piece and then chroming the copper. Aluminium falls into this catagory. I remember, in the late '70's some chromers were skipping the copper on metal parts resulting in some really lousy chrome. The tipovers need smoothed out before chroming or the rough surface will come though.
Top of the page Bottom of the page
TimS
Posted 2008-09-02 11:49 PM (#17452 - in reply to #17451)
Subject: Re: chrome tipovers questions?


Iron Butt

Posts: 810

The chromer smoothed the surface of my tip-over protectors, but wasn't able to fill in the remaining pours.

I wonder what they are supposed to do about the pours (fill in and re-smooth)?

 

Tim

Top of the page Bottom of the page
airguy
Posted 2008-09-04 11:04 AM (#17520 - in reply to #17452)
Subject: Re: chrome tipovers questions?


Cruiser

Posts: 175
Hinton, Iowa
Tim, your bike looks great. Thanks for the info. How much did your chromer charge to chrome them and how big of a pain in the ass were they to get off? Thanks, Mike
Top of the page Bottom of the page
TimS
Posted 2008-09-04 11:45 AM (#17522 - in reply to #17520)
Subject: Re: chrome tipovers questions?


Iron Butt

Posts: 810

The dealer did it so I don't know about the labor.  The job was @ $300.  My bike was rear-ended by a MiniVan so while it was in the shop getting fixed, I had them do the tip overs as well.

Tim

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™