You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Exhaust Gaskets
Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
ScoreBo
Posted 2008-09-28 11:08 PM (#19192)
Subject: Exhaust Gaskets


Iron Butt

Posts: 1117
Northeast Ohio		In my quest to eliminate decel popping, Lloyd recommended that I swap the gaskets out with ones I think go into a Vegas.

The one on the left was my rear gasket and right is the front. Do you think I had a leak at the front?

The bottom two are differences between the old and new gaskets.

HiRes Pics here:
http://scorebo.brinkster.net/images/static/BackAndFront.jpg
http://scorebo.brinkster.net/images/static/OldVsNew.jpg
http://scorebo.brinkster.net/images/static/SideShot.jpg


Edited by ScoreBo 2008-09-28 11:35 PM




(GasketComparison.jpg)



(GasketComparo.jpg)



(SideBySide.jpg)



Attachments
----------------
Attachments GasketComparison.jpg (53KB - 1 downloads)
Attachments GasketComparo.jpg (51KB - 1 downloads)
Attachments SideBySide.jpg (44KB - 1 downloads)
Top of the page Bottom of the page
cw1115
Posted 2008-09-30 12:18 AM (#19307 - in reply to #19192)
Subject: Re: Exhaust Gaskets


Visionary

Posts: 1290
Ruskin, Fl		Was there any improvement on the popping?
Top of the page Bottom of the page
tralphaz
Posted 2008-09-30 11:05 PM (#19395 - in reply to #19307)
Subject: Re: Exhaust Gaskets


Tourer

Posts: 353
Were they difficult to install, or did you have them installed by someone else?
Top of the page Bottom of the page
ScoreBo
Posted 2008-10-01 12:08 AM (#19403 - in reply to #19192)
Subject: Re: Exhaust Gaskets


Iron Butt

Posts: 1117
Northeast Ohio		The biggest improvement came from the recall reflash, but this reduced it even more.

I installed them and it took me a fair amount of time. You basically have to remove the entire exhaust system. I would highly encourage every Vision owner to loosen the exhaust and tighten the head-to-exhaust bolts. Had I known, this is what I would have done.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™