|
|
Puddle Jumper
Posts: 44
Houston, TX United States | Found this today, has anybody had this issue, looks like the Heated Grip power wire.
(Grip.jpg)
Attachments
----------------
 Grip.jpg (78KB - 1 downloads)
|
|
| |
|
Visionary
Posts: 4278
| yup looks bad ebay might be a good place to find new grips |
|
| |
|
Puddle Jumper
Posts: 44
Houston, TX United States | Thank You Johnnyvision !!! |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | If it were mine, I would probably splice it back together.
Ronnie |
|
| |
|
Visionary
Posts: 1228
Rancho Cucamonga, CA | No real way to splice it back. The movement of the throttle will keep breaking it. I replaced mine with heated Avon grips. Cheaper with a beefier cable. Only bad thing is you have to use their controller instead of the hi/low switch already in place. |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | I understand about the throttle movement. I would probably try installing a beefier wire to the assembly and doing the spice upstream, away from the moving parts. Might not work, but I'm cheap and would have to try.
Ronnie |
|
| |
|
Visionary
Posts: 4278
| doesn't look like there is any wires sticking out to reconnect.
guys this a good time to look at yours and see that when you twist the throttle the wire moves freely |
|
| |
|
Puddle Jumper
Posts: 44
Houston, TX United States | Johnnyvision, your correct there are no wires sticking out it broke off even with the Grip. |
|
| |
Broken Wire
