You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Soon to be Vision owner
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
funhunter63
Posted 2016-02-19 3:09 AM (#178826)
Subject: Soon to be Vision owner


Puddle Jumper

Posts: 5
Ponca City, OK
I will pick up my 2008 Vision tour Comfort Saturday.

Anyone else from the Ponca City, OK area?

Do J&M headsets plug into the vision's sound system?
Top of the page Bottom of the page
funhunter63
Posted 2016-02-19 3:09 AM (#178827 - in reply to #178826)
Subject: Soon to be Vision owner


Puddle Jumper

Posts: 5
Ponca City, OK
I will pick up my 2008 Vision tour Comfort Saturday.

Anyone else from the Ponca City, OK area?

Do J&M headsets plug into the vision's sound system?
Top of the page Bottom of the page
Don07tncav
Posted 2016-02-19 4:44 AM (#178828 - in reply to #178827)
Subject: Re: Soon to be Vision owner


Cruiser

Posts: 207
Congrats on the purchase. Not sure about your other question.
Top of the page Bottom of the page
jimtom
Posted 2016-02-19 5:23 AM (#178829 - in reply to #178826)
Subject: RE: Soon to be Vision owner


Visionary

Posts: 1308
Sand Rock, AL United States
congratulations ! I can't answer the audio question and I don't live in Ponca City but I do stream a live radio broadcast daily to my work computer of a Christian station that is based in Ponca City called The House FM. Enjoy your new ride, there is nothing like the Vision.
Top of the page Bottom of the page
ljurgens
Posted 2016-02-19 8:26 AM (#178836 - in reply to #178826)
Subject: Re: Soon to be Vision owner


Tourer

Posts: 341
West Salem, WI United States
Welcome to the Vision. If you already have the headsets, then I think you should contact J&M, if I remember right they have a harness you can purchase to make those connections.
Top of the page Bottom of the page
johnnyvision
Posted 2016-02-19 5:29 PM (#178842 - in reply to #178826)
Subject: Re: Soon to be Vision owner


Visionary

Posts: 4278
get owners book and read it you'll find out how to check oil
Top of the page Bottom of the page
jc0808
Posted 2016-02-19 6:01 PM (#178843 - in reply to #178826)
Subject: Re: Soon to be Vision owner


Puddle Jumper

Posts: 8
VA Beach
Congrats. Yes a J&M headset will plug in in the Vision if you have a 7 pin connector. Depending on your configuration you may have to change the lower cord or the whole cord to a 7 pin configuration. The vision uses the same J&M 7 pin connector as the CAN-AM; a Goldwing connector will not fit. I am unsure about the HD connector.

JC
Top of the page Bottom of the page
rdbudd
Posted 2016-02-19 6:50 PM (#178844 - in reply to #178826)
Subject: RE: Soon to be Vision owner


Visionary

Posts: 1631
Jasper, MO
funhunter63 - 2016-02-19 3:09 AM

I will pick up my 2008 Vision tour Comfort Saturday.

Do J&M headsets plug into the vision's sound system?


Congratulations.

Yes, they do. Just get the lower half cord to match the Vision.

I use the same headsets on two different brands of motorcycles. Just use the appropriate lower cord.

Ronnie
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2022 Victory Riders Network™