You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Exhaust modification
Jump to page : 1 2 3
Now viewing page 3 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
soprano13
Posted 2010-02-03 10:11 PM (#52615 - in reply to #22458)
Subject: Re: Exhaust modification


Cruiser

Posts: 71
Bayonne, NJ
some harley pipes i have played with the baffles not solid enough sound when they are removed. if u want a solid and deep sound see if u can cut the baffles down and re install. my cousins crossbones we cut the baffles in half roars soo nice and deep

Edited by soprano13 2010-02-03 10:11 PM
Top of the page Bottom of the page
spot32
Posted 2010-03-01 12:56 PM (#54141 - in reply to #22458)
Subject: Re: Exhaust modification


Puddle Jumper

Posts: 18
So did you guys all put the baffles back in? Sounds like if you want louder send to the Atom Bomb guy or Ness Honkers. I used to have a thunder header on my Dyna wide glide and it sounded really good at all speeds and loud as anything when you hammered it down but the tips for the Vision looks like S _ _ T, so until they fix the cone end I will not buy.
Top of the page Bottom of the page
jeffmack
Posted 2010-03-01 1:27 PM (#54142 - in reply to #22458)
Subject: Re: Exhaust modification


Iron Butt

Posts: 623
I put the thundercones on my Vision, call me crazy but I like the look, makes the bike look longer and lower. I have heard everything from Honkers to Atom bombs to s1 and s2.....nothing has sounded better on the vision yet. I have Lloydz vm1's and they work well with the setup.
Top of the page Bottom of the page
rbarrera1
Posted 2010-03-01 8:56 PM (#54168 - in reply to #22458)
Subject: Re: Exhaust modification


Puddle Jumper

Posts: 20
Still riding without the baffles, less popping sound also.
Top of the page Bottom of the page
mickcathey
Posted 2013-05-08 4:04 PM (#138569 - in reply to #22458)
Subject: Re: Exhaust modification


New user

Posts: 1
Great thread for modifying the Stage 1 Level 2 exhaust. Thanks nobodyhome - I did what you did. It sounds great! I have 2 rows of baffle not covered and it's pretty quite unless I throttle on it.

I had a hell of a time getting one of the baffles out due to carbon build up and rust. Used a 1 1/4 pipe to hammer it out from the back. Also worked for bending the sheet metal and aligning the baffles when reinstalling.
Top of the page Bottom of the page
kman
Posted 2013-05-14 9:36 PM (#138957 - in reply to #22458)
Subject: Re: Exhaust modification


Puddle Jumper

Posts: 5
Can a pipe be installed in stock Vision pipes as Lotzafun was talking about, or only on S1 or S2 pipes?

kman
2012 sunset red with graphics
Top of the page Bottom of the page
kris1956
Posted 2013-05-15 6:09 AM (#138969 - in reply to #138957)
Subject: Re: Exhaust modification


Iron Butt

Posts: 1109
I removed my baffles and couldn't stand the noise, I have a HD with open drag pipes if I want noise. I did cut the baffles down and the pipes are a bit more throaty which is what I was looking for.
Top of the page Bottom of the page
Jump to page : 1 2 3
Now viewing page 3 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™