You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




EXHAUST
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
witchbiker
Posted 2017-03-02 6:48 PM (#191572)
Subject: EXHAUST


Cruiser

Posts: 222
Barefoot Bay, FL United States

FOUND IT !! The reason for the noise, that is!! 

A 3" split on the rear header pipe, just outside the cylinder head! It is so bad that it left an impression of the split on the inside of the chrome cover, which showed a 'blue' area on the outer surface, the same blueing as the pipe when it gets hot! Lots of backfiring when slowing down and when shifting.

Had to go with Freedom Performance pipes. Hopefully they'll last as long as the stock pipes did, just under 76K.

witchbiker

Chrome does NOT like Florida!!

Top of the page Bottom of the page
johnnyvision
Posted 2017-03-03 6:35 PM (#191578 - in reply to #191572)
Subject: Re: EXHAUST


Visionary

Posts: 4278
there is plenty of vic's with the same crack in the pipe. Its either cheap metal or to sharp a bend.

find a guy that can weld. He can close it up
Top of the page Bottom of the page
witchbiker
Posted 2017-03-05 8:02 AM (#191583 - in reply to #191572)
Subject: Re: EXHAUST


Cruiser

Posts: 222
Barefoot Bay, FL United States
AHHHH....NO! I don't think so!! No crap welding on this bike Sorry, questionable advise at best there Mr. Johnny!
Top of the page Bottom of the page
johnnyvision
Posted 2017-03-05 5:34 PM (#191587 - in reply to #191572)
Subject: Re: EXHAUST


Visionary

Posts: 4278
the only way you would get crap welding is if "you" picked a crap welder
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™