You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 190
| Or height.
I'm curious to the length of the stock rocker...I measured mine today before I loaded it into a trailer for the ride to the tire dealer and got roughly 12 3/4 inches on center to the mounting bolts. I'm wondering if the dealer in Denton didn't put on a rocker for the 8-ball.... I took a couple pics if that'll help visual what the top end looks like.
(rear shock 2.jpg)
(rear shock 1.jpg)
Attachments
----------------
 rear shock 2.jpg (106KB - 0 downloads)
rear shock 1.jpg (79KB - 0 downloads)
|
|
| |
|
Visionary
Posts: 4278
| don't know length but the 8 ball one is maybe 11 inches maybe this will help
https://www.youtube.com/watch?v=z2A_5Ubgm9o |
|
| |
|
Cruiser
Posts: 190
| I finally found the sales receipt for the shock...it's for the Ness/8-Ball and isn't the correct, asked for, stock shock number. It's passed the 30 day limit for any recourse with the Denton bike shop who installed it and, frankly, I have to take responsibility for taking this long to figure out just what was wrong/different with it. I called them and talked to the salesman who ordered it for me if only to make sure he'd be aware that, perhaps, a slower, deliberate look while ordering parts was called for in the future. Between the activity in the store and me yacking away, I can see how he could drop one spot too low in the catalog and order a part number ending in 903 instead of 904.
I have a new shock ordered through cheapcycles...saved me $100 even with shipping and I even called and talked to someone there to double check to make sure I wasn't messing this order up as well. Now to find out if my son's willing to help me put it on.
Edited by beemerdad2@yahoo.com 2017-06-02 3:07 PM
|
|
| |
|
Cruiser
Posts: 106
| So the 8 Ball shock rocker is different? Good to know |
|
| |
|
Cruiser
Posts: 190
| If I can do this, here are the 2 different part numbers for the shock. Even though they're both listed as #6, the number ending in 903 is the stock shock..904 is the Ness or 8-ball shock which, I believe, is an inch shorter. I ordered mine through cheapcycles.com for $533 plus shipping. Same part number.
Edited by beemerdad2@yahoo.com 2017-06-02 8:18 PM
(Shock part numbers.jpg)
Attachments
----------------
Shock part numbers.jpg (76KB - 0 downloads)
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Pushrod Rocker length
