You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Mastercylinder covers
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
witchbiker
Posted 2017-06-22 8:20 AM (#192020)
Subject: Mastercylinder covers


Cruiser

Posts: 218
Barefoot Bay, FL United States

Does anyone know if the clutch and brake master cylinder covers on the Cross Country, fit the Vision? They look like they are the same master cylinder, so I'm thinking the covers would be the same also.

2008 Vision 85k and going strong.

Just did 5200 miles to Cali. and back!! Only issue was fouled aftermarket plug wires in torrential downpours coming through Mississippi. Stick with stock!!!

Top of the page Bottom of the page
witchbiker
Posted 2017-06-22 8:32 AM (#192021 - in reply to #192020)
Subject: Re: Mastercylinder covers


Cruiser

Posts: 218
Barefoot Bay, FL United States
Just realized the CC clutch is a cable type, not hydraulic, so there wouldn't be any clutch master cyl. I expect the cover on the CC brake master would fit the clutch cover on the Vision, if it fits the brake master on the Vision. Just flip it the other way.
Top of the page Bottom of the page
twocell
Posted 2017-06-23 5:39 PM (#192029 - in reply to #192020)
Subject: Re: Mastercylinder covers


Puddle Jumper

Posts: 32
Lackawaxen PA United States
they're different each side ... check out badacebillet on ebay or witchdoctors
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2018 Victory Riders Network™