You are currently not logged in.  Logon or register to access more features. is a FREE service provided by Victory Riders Network.


Front fork seal install
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
Posted 2017-07-05 10:07 AM (#192067)
Subject: Front fork seal install


Posts: 212
Tavares, Fl
Yesterday I replaced the front fork seals on my 12 Vision. It was much easier than I expected. I ordered the kit from Witchdoctors and watched their video.. I will attach a photo of the tools I used. The only thing different is the short 6mm allen wrench with 1/4 open ended wrench to loosen the top bolts. To install the new seals I put them in by hand as far as I could, put the old metal washer on top of it then the old seal on top of that. I then used a 3 inch pvc pipe to drive the new seal into place. Victory calls for 550 cc of fluid, so I put in 2 cups of 10 weight fork oil...So far they work great, a little firmer than before which is what I wanted....

(fork seal tools.jpg)

Attachments fork seal tools.jpg (33KB - 4 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™