You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Any tips to getting the snapring off .....
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Randyl
Posted 2017-09-30 4:44 PM (#192280)
Subject: Any tips to getting the snapring off .....


New user

Posts: 4
Was going to install the passenger floorboard risers but can not seem to get the tiny circlip off. They say to use snap ring pliers but all mine are for snaprings with eyes and these are a solid ring around the pin in a groove. Wasn't able to get under it with a pick or small screw driver.
Any help would be greatly appreciated!
Top of the page Bottom of the page
SteveS
Posted 2017-10-03 9:19 AM (#192285 - in reply to #192280)
Subject: Re: Any tips to getting the snapring off .....


Cruiser

Posts: 154
Danbury, Connecticut
Mine might be different but it looks like the clip with eyes with half the eye removed and could still use a very small pair of clip pliers. I know there are clips that have no means of using pliers and I use a small pair or needle nose on each side and push it off-pliers and clip aligned on same plane. Cover with a rag or tape to keep the clip from flying away.
Top of the page Bottom of the page
johnnyvision
Posted 2017-10-08 11:03 AM (#192289 - in reply to #192280)
Subject: Re: Any tips to getting the snapring off .....


Visionary

Posts: 4214
pry off clip. take pin and go to hardware store and buy new C clip.
A slight bend in old clip from getting it off will not hold pin in long run
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2017 Victory Riders Network™