You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




oil in starter
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
buzz5207
Posted 2021-07-23 6:06 PM (#193085)
Subject: oil in starter


New user

Posts: 1
Original starter just wore out and I bought a new one off Amazon. It worked well for about 2 weeks then got to where it was turning the engine over slowly and lurchingly. I figured it was jut a cheap stater so i bought another from witchdoctor. So as I am loosing the bolts in the rectifyer mounting plate oil comes flowing out from the bolt holes in the starter. So I figure just a bad seal on a cheap starter. Well now the newer starter from witchdoctors has the same issue with oil in it. Anyone have any ideas what is causing this or what I could be doing wrong?
Top of the page Bottom of the page
Crossbow King
Posted 2022-01-10 9:52 PM (#193113 - in reply to #193085)
Subject: Re: oil in starter


Puddle Jumper

Posts: 20
Give Rylan a call at The Vic Shop in Iowa
Top of the page Bottom of the page
Arkainzeye
Posted 2023-01-11 9:35 PM (#193165 - in reply to #193085)
Subject: Re: oil in starter


Visionary

Posts: 3773
Pittsburgh, PA
does he usually give free advice ?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™