You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Installation of my ICOM, and stuff.
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
metalguy
Posted 2007-12-19 10:12 AM (#3276)
Subject: Installation of my ICOM, and stuff.


Tourer

Posts: 550
Tacoma, WA
Hey guys,
I am installing all the stuff I can for my Intercom, and CB, etc, until my trunk shows up. I got the controller for the stereo swapped out, and will install the wiring that I can for all the other stuff as I am able. I have the GPS, and was wondering if that plugs into the harness?? I didn't get the stand for it yet, but I have tried the thing out in my truck, and Z-car with good results. I am glad I saw on this forum where the screws are for the heated grip to remove it!!! That would have been a head scratcher, for sure. Have a good day guys...Metalguy
Top of the page Bottom of the page
TimS
Posted 2007-12-19 11:25 AM (#3285 - in reply to #3276)
Subject: RE: Installation of my ICOM, and stuff.


Iron Butt

Posts: 810
metalguy - 2007-12-19 10:12 AM
.... I have the GPS, and was wondering if that plugs into the harness?? ...)


The GPS plugs into a harness that is located under the right side of the gray center console. There is a little dark capsule cover that goes over the end of the harness. The new harness that comes with the GPS mount just connects to existing harness after removing the cover.

HTH,
Tim
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™