|
|
Cruiser
Posts: 205
| Assuming they fit, can someone direct me to how/where I can get prices of the panels in black like they are on the 8-ball vision, or the Ness.
Is the 8-ball Vision the same frame/bike as the normal Vision? The handlebars--pullback sure look the same too.
Do you think these black trim panels would fit on an 09?
thanks |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | I just hope the black grab handles fit my 2008.
Cool! |
|
| |
|
Cruiser
Posts: 205
| Cycle Dragon has a trade in deal for those grab handles and the rear gray lower piece (by the pipe tips)... both in gloss black.. $300 total. Nice.... |
|
| |
|
Iron Butt
Posts: 1158
Richmond, Virginia | for 289.00 you can get them in chrome black zzzzzzzzzzzzzzzzzz |
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | Mfoster - 2009-07-22 10:15 PM
Assuming they fit, can someone direct me to how/where I can get prices of the panels in black like they are on the 8-ball vision, or the Ness.
Is the 8-ball Vision the same frame/bike as the normal Vision? The handlebars--pullback sure look the same too.
Do you think these black trim panels would fit on an 09?
thanks
If you go to polaris web site and look at the part manual exploded view..you can get the part numbers from the 09 ness. You will notice the part numbers end with -266 which is the cruiser black code. Take those part numbers to the dealer. I ordered the the black instrument cluster like on the Ness/Anniversary this way. |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Randy's Victory in Huntley IL has a complete set of the panels in black. I think they are $350...not sure...they might be $300. Since I'm already blacked out I didn't pay much attention. Seen them hanging from the cieling with a price tag, I know it was 3 something.
Give them a call at 847-669-0256 |
|
| |
|
Cruiser
Posts: 92
West Bend, WI | Lotzafun - 2009-07-23 7:27 AM
Randy's Victory in Huntley IL has a complete set of the panels in black. I think they are $350...not sure...they might be $300. Since I'm already blacked out I didn't pay much attention. Seen them hanging from the cieling with a price tag, I know it was 3 something.
Give them a call at 847-669-0256
Is that for a complete set of blacked out silver panels? |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | dollarbillwi - 2009-07-23 7:36 AM Is that for a complete set of blacked out silver panels? Yeppers Well at least I'm pretty positive that it was a complete set. Don't remember seeing any pieces missing. Give them a holler. |
|
| |
|
Cruiser
Posts: 260
| Darn, wish I knew about this. Just called and you alredy bought them!!! Aren you haveing them mount them? What are you doing with your take off's? |
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | do u want the take-offs?..:-) |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Um...I should have mentioned something. I honestly just remembered this...
I've seen a few panels that Randy's has had painted in the past. Not sure what collision shop he uses but based on the overall quality of the paint I'm guessing that he goes with the "lowest possible price" route. Heck, maybe even does them in-house with a spray can from Autozone?
But hey...for the price he is asking for the panels you really can't be very picky on the quality. Guess I just wanted to prepare your expectations a bit.
|
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | I hope you r joking... |
|
| |
|
Cruiser
Posts: 260
| mrwatson - 2009-07-23 1:12 PM
I hope you r joking...
I think he is, but you never know! What you looking to get for them? |
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | If you r not in a hurry..let me get back with you..let me get these and see what they look like.. |
|
| |
|
Cruiser
Posts: 260
| mrwatson - 2009-07-23 1:27 PM
If you r not in a hurry..let me get back with you..let me get these and see what they look like..
Randy is a quality guy, I wouldn't worry. Let me know, thanks Your bike will look GREAT!!! |
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | Thanks..I hope so...will do |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | mrwatson - 2009-07-23 1:12 PM I hope you r joking... If you are referring to my post about the overall paint quality I've seen from Randy's....I'm not joking. But as mentioned....Randy is a stand up great guy. He is not going to risk any damage to his reputation over any deal with anyone at anytime. If you picked them up for anything less than $400 and even if the paint quality is a bit roughish you STILL got a pretty good deal. I'm sure that Randy had them priced accordingly. As I said earlier, I'm already all black, so to be honest I really didn't even give these panels a second glance. The paint quality might be great...or it might be a bit rough..or whatever. You got a good deal, if the paint quality is anywhere above ok or good or great then the deal gets even better. And if the quality is a little on the rough side you can possibly have a collision facilty do a little wet sanding and buffing and bring the quality up. Even in a worse case scenario that requires a repaint....still a good deal just for panels no matter what color or quality they are. As long as they aren't twisted or dinged/dented Maybe I shouldn't have mentioned the paint quality. I guess possibly I just wanted you to be a bit prepared Probably getting you worried over nothing. But as I've said more than enough times....I'm sure that they were priced right and you got a good deal.
Edited by Lotzafun 2009-07-23 6:28 PM
|
|
| |
|
Cruiser
Posts: 75
McHenry, IL | mrwatson - 2009-07-23 11:30 AM
do u want the take-offs?..:-)
I might be interested. I work part time at a custom bike shop and have been thinking about setting up an exchange program for color matched panels.
Let me know how much you would like to get for them.
|
|
| |
|
Puddle Jumper
Posts: 34
| Dont forget that the 8 ball doesn't have radio etc , so no holes in the dash , cheers MartyQ |
|
| |
|
Cruiser
Posts: 128
Aubrey, TX | So I finally got the bike back together..Lotzafun..u were right..the paint was kinda crappy. I was able to buff most of the parts out. I had to take the grab rails to a local painter because I could not save those. All in all..after selling my old parts. I ended up with about $200 getting everything blacked out which I did not think was too bad. Thanks Lotzafun for the heads up on the parts. I put pics in the gallery for enyone wanting to check it out. |
|
| |
Black Grill/panels of 2010 for 2009? How do I buy them?
