You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




thundercones from Thunderheader
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
jeffmack
Posted 2010-03-10 7:53 PM (#54802)
Subject: thundercones from Thunderheader


Iron Butt

Posts: 623


Got them from lloydz website. I can't stop riding around with a big grin. I shopped and shopped for a exhaust...listen to Atom bombs, S1, S2, Honkers, etc. nothing had the deeper sound to my ear. The set up worked perfectly with what I had before (S1L1, Lloydz cams, intake and VFC) The sound is deep and only loud when you want it to be. Lloyd dyno'd the set up at 109.4 x 113.7. SWEET
id recommend them if your looking for a nice deep tone.



(goldddddddd 024.jpg)



(goldddddddd 023.jpg)



(goldddddddd 005.jpg)



(goldddddddd 001.jpg)



Attachments
----------------
Attachments goldddddddd 024.jpg (76KB - 9 downloads)
Attachments goldddddddd 023.jpg (86KB - 4 downloads)
Attachments goldddddddd 005.jpg (74KB - 4 downloads)
Attachments goldddddddd 001.jpg (85KB - 4 downloads)
Top of the page Bottom of the page
merkin
Posted 2015-10-01 1:43 PM (#175258 - in reply to #54802)
Subject: RE: thundercones from Thunderheader


New user

Posts: 1
Can you tell me how you spaced the heat shields?
Top of the page Bottom of the page
Pops
Posted 2015-10-01 8:26 PM (#175259 - in reply to #54802)
Subject: Re: thundercones from Thunderheader


Cruiser

Posts: 180
Georgia On My Mind.... United States
Where's the LIKE button!

Neat!
Top of the page Bottom of the page
jeffmack
Posted 2015-10-02 9:15 AM (#175265 - in reply to #54802)
Subject: RE: thundercones from Thunderheader


Iron Butt

Posts: 623
I'll try. Worked out pretty easy. I went to auto parts store and baught 4 exhaust u joint couplers ,2 for each side, they provided the perfect spacer for the each shields to match up as stock exhaust did. Have ran the bike for over 90k (even up to the arctic circle of crappy roads!) miles this way with out any problems. They never budged. I installed these clamps next to stock strap locations.



Attachments
----------------
Attachments image.jpeg (284KB - 10 downloads)
Top of the page Bottom of the page
jeffmack
Posted 2015-10-02 3:52 PM (#175269 - in reply to #175259)
Subject: Re: thundercones from Thunderheader


Iron Butt

Posts: 623
thanks Pops!
Top of the page Bottom of the page
Pops
Posted 2015-10-03 6:44 AM (#175271 - in reply to #54802)
Subject: Re: thundercones from Thunderheader


Cruiser

Posts: 180
Georgia On My Mind.... United States
OK, now you've done it. I've got to have those.

Can you run them on a stock vision, or does the bike need to be re-mapped or tuned?

Also, are you talking about automotive muffler U clamps for spacers?

Thanks again for the post.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™