|
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | That 11,000 is most likely 30 of us checking a buzillion times each! |
|
| |
|
Cruiser
Posts: 81
Salinas, Ca. | I think your exactly right, lol....  |
|
| |
|
Tourer
Posts: 446
East TN | I want CHROME TOO!!!!! But I can wait a while!!! Like tomorrow!! |
|
| |
|
Visionary
Posts: 1228
Rancho Cucamonga, CA | Is there anyway to extend them out a little so the main exhaust area is flush with the back of the bike and the center cone goes beyond? |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | Can't wait to see how the fluted ones turned out. Now if we can only rig them up to shoot fire out the back when we blast off! |
|
| |
|
Visionary
Posts: 3204
Memphis | I'm trying to figure out how to recess red LEDs into the flutes.  |
|
| |
|
Tourer
Posts: 520
Simi Valley, CA | SongFan - 2010-12-17 1:58 PM
I'm trying to figure out how to recess red LEDs into the flutes.?
Dude..... you do it and I am so there.... |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | How hot does the exhaust get back there? I have mine put away for the winter . . . anyone have a clue? |
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | It CAN be done!Now does anyone have any "melt proof" wire and LEDs???<br />
Edited by Man314 2010-12-17 5:12 PM
(BZSVMTYL.jpg)
(Toucan-100310.jpg)
(led_li6.jpg)
Attachments
----------------
 BZSVMTYL.jpg (32KB - 4 downloads)
Toucan-100310.jpg (21KB - 5 downloads)
led_li6.jpg (36KB - 3 downloads)
|
|
| |
|
Tourer
Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles" | Ok . . . here we go with the real deal!
http://www.akamoto.co.uk/flaming-exhaust.asp
(Exhaust_Flame_Thrower.jpg)
Attachments
----------------
Exhaust_Flame_Thrower.jpg (10KB - 4 downloads)
|
|
| |
|
Cruiser
Posts: 51
REXBURG IDAHO | great look i would be in for a pair. |
|
| |
|
Iron Butt
Posts: 721
| Here are pictures I just took of a tip with the flutes mounted on my vision, the flutes are not quite as the original drawing looked like as it proved to be cost prohibitive in production time. If someone really has to have them with the cylindrical style flutes it can be had but will cost approximately $100 more per set:
(rsz_1jet_tips9.jpg)
(rsz_jet_tips10.jpg)
(rsz_11jet_tips11.jpg)
Attachments
----------------
rsz_1jet_tips9.jpg (94KB - 4 downloads)
rsz_jet_tips10.jpg (68KB - 2 downloads)
rsz_11jet_tips11.jpg (85KB - 3 downloads)
|
|
| |
|
Iron Butt
Posts: 721
| I am ready to begin shipping these on Monday for those of you that want a bare machined finish so you can do your own thing with the final finish.
The price is $250.00 per complete set with all necessary components, minus a 20% Victory Preferred Discount for confirmed members of Victory Rider's and Victory Motorcycle Club boards meaning cost is $200.00 plus insured shipping via UPS
Please email contact and shipping information to:
MrWizardsBilletCreations@comcast.net
Once I receive an email I will contact you regarding shipping costs and arrange a payment method via either personal check (5 day wait on check clearance), money order, or instant payment through PayPal.
I currently will only be accepting orders through email. If you have any question you can call me at 815-953-7706 Monday through Friday between 7 am and 5 pm .
I thank you all for you encouragement and support during this long development process. |
|
| |
|
Iron Butt
Posts: 721
| Also, I delivered the first set today to Bluto (hey, he designed them!) and I have taken an order from a Northern Illinois Victory dealer.
All told I have a total of 22 sets produced, minus 1 set to Bluto and 1 set to the dealer leaving 20 sets available for purchase, 2 sets with smooth sides as shown in the first pictures and 18 sets with fluted sides. |
|
| |
|
Cruiser
Posts: 157
| They are bad ass I hope to order a set in the VERY near future. They do bolt right up to the stock exhaust correct ? |
|
| |
|
Visionary
Posts: 3204
Memphis | My order's placed. Chrome with black cones. HO HO HO! |
|
| |
|
Cruiser
Posts: 177
NW Illinois | Can I guess what Dealer out of maybe Union Il
No longer Huntley
The fluted ones are awsome
how much more when chromed |
|
| |
|
Visionary
Posts: 3204
Memphis | He hasn't come out with chrome/anodizing prices yet. I just ordered to reserve a set for whenever they get all options available. |
|
| |
|
Tourer
Posts: 329
scotts valley, California | Michael, what are you the Lead Designer of. I really enjoy your humor and art work.
Everyone, please forgive me for side stepping the forum thread; it just looked like it needed the activity! (post #11,041 on this thread) |
|
| |
|
Visionary
Posts: 3204
Memphis | Blue Sky Guy - 2010-12-18 5:19 PM Michael, what are you the Lead Designer of. I'm not Michael. That signature is props to the design/engineering team that produced the '08 Vision. Mike Song was the Lead Designer of the Vision (thus my handle here on the Forum). I'm Tom. Happens all the time. |
|
| |
|
Tourer
Posts: 329
scotts valley, California | Hi, Tom. Nice to meet you. Now that I understand, I guess we are all Song Fans. |
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | Blue Sky Guy - 2010-12-18 8:00 PM
Hi, Tom. Nice to meet you. Now that I understand, I guess we are all Song Fans.
+++111 |
|
| |
|
Iron Butt
Posts: 639
Tri Cities, WA | I have red led lights in my fluted exhaust tips since 08. They have worked well and not a problem to be had. Trick is shrink wrap the wire and electrical tape it up and then use some apoxy to help the leds stay in there for good. Mine are red. See attched pic.
SongFan - 2010-12-17 12:58 PM
I'm trying to figure out how to recess red LEDs into the flutes.?
(IMG_4682.JPG)
(IMG_4742.JPG)
Attachments
----------------
IMG_4682.JPG (47KB - 10 downloads)
IMG_4742.JPG (71KB - 3 downloads)
|
|
| |
|
Visionary
Posts: 3204
Memphis | Wow Chuck, Nice! |
|
| |
|
Tourer
Posts: 401
| warp drive is supposed to be blue |
|
| |
Custom Exhaust tips
