You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Fork Bullet install problem
Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
stretch1956
Posted 2011-01-25 6:01 PM (#78138)
Subject: Fork Bullet install problem


Cruiser

Posts: 82
Fargo, ND		I downloaded the instructions for the mod of the fork bullets. Bought all the hardware, ordered the lug nut covers online, assembled the apparatus, melted the nuts into the pvc adapters... crawled under my front forks and " WHERE THE HELL ARE THE PREDRILLED HOLES IN THE ENDS OF THE FORKS???? I have a 2009 Vision Tour Premium and the forks are chromed all the way to the botom of the forks. the only hole is the access to the fork nut in the center of the fork end. Is this the same on all of the Tour Premiums or did I get the red headed step child of the litter?

My next question would be... can I drill into the ends of the forks without damaging them?
I guess I could have looked at the forks before I started this whole process but then I would not have anything to bring to my Brothers with Vision!

What do you think?
Stretch

2009 VVTP Black with Carbon Fiber Mod.
Top of the page Bottom of the page
Thomas
Posted 2011-01-25 6:40 PM (#78141 - in reply to #78138)
Subject: RE: Fork Bullet install problem


Central Wisconsin

 " WHERE THE HELL ARE THE PREDRILLED HOLES IN THE ENDS OF THE FORKS????

I have a 2009 Vision Tour Premium and the forks are chromed all the way to the botom of the forks.

 That's a bummer  

 

 

 

My bike is a 2009 Touring , don't know the forks wouldn't be the same other then yours is chromed.

I would think you could drill and tap a couple holes. Providing your careful not to go in to far.

 

 

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™