|
|
Cruiser
Posts: 102
Cedar, Michigan | So what are the options for both front and rear, seems slim to none? |
|
| |
|
Iron Butt
Posts: 741
Central New York | Kruzer Kaddy.
|
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | Pick up one from the accesories display @ the dealers, you change the lower half of the left side controls clamp on the bars and it uses a threaded ball that the holder clamps to, took me about 7 minutes from 'let's see about this' to 'hey! it'll hold a pretty big cold drink cup'. Don't know what your passenger would do with their drink-but they pretty much do have both hands free all the time.
You'll need a metric allen wrench set. |
|
| |
|
Cruiser
Posts: 102
Cedar, Michigan | glighto11 - 2011-06-08 9:15 PM
Kruzer Kaddy.
Yea, I had that on my past bikes. There seems to be no application for the Vision, am I missing something? |
|
| |
|
Visionary
Posts: 1359
New Bohemia, Va | ...mine...
(CIMG0187.jpg)
Attachments
----------------
 CIMG0187.jpg (29KB - 10 downloads)
|
|
| |
|
Iron Butt
Posts: 965
New York State | I have the Kruzer Kaddy on my right hand side of the handle bars chrome looks great |
|
| |
|
Puddle Jumper
Posts: 37
Southern Indiana | I have the ram ball mount in the hole on the brake handle with thier cup holder and love it will hold any drink you want
|
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | Trekwolf164 - 2011-06-08 8:44 PM
I have the Kruzer Kaddy on my right hand side of the handle bars chrome looks great
+1 but on the left. |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | ScoreBo - 2011-06-08 9:07 PM
Trekwolf164 - 2011-06-08 8:44 PM
I have the Kruzer Kaddy on my right hand side of the handle bars chrome looks great
+1 but on the left.
+2 One on each side!
Edited by radioteacher 2011-06-08 9:59 PM
(TwoKruserKaddys.jpg)
Attachments
----------------
TwoKruserKaddys.jpg (22KB - 10 downloads)
|
|
| |
|
Cruiser
Posts: 142
elgin mn | my Kruzer Kaddy is on left handlebar,have seen Passenger on The Right grab handle.. |
|
| |
|
Visionary
Posts: 1228
Rancho Cucamonga, CA | Kruzer Kaddy- you need to buy longer bolts though.
(2011-01-31 13.50.21_edit0.jpg)
(2011-02-19 13.02.03a.jpg)
Attachments
----------------
2011-01-31 13.50.21_edit0.jpg (57KB - 3 downloads)
2011-02-19 13.02.03a.jpg (82KB - 2 downloads)
|
|
| |
|
Iron Butt
Posts: 741
Central New York | I thought that the Bar Clamp that came with my KK was ugly and mounting on the control cylinders was too in-my-face. I used the piece of flat stock they give you and drilled and tapped my handle bar about halfway to the tree, on the outside. Works great.
|
|
| |
|
Puddle Jumper
Posts: 37
Southern Indiana | This is the set up I'm running
Edited by RiverRat 2011-06-09 8:20 AM
Attachments
----------------
1661.jpeg (27KB - 109 downloads)
1671.jpeg (28KB - 46 downloads)
1674.jpeg (25KB - 18 downloads)
1681.jpeg (24KB - 18 downloads)
|
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | ScoreBo - 2011-06-08 10:07 PM
Trekwolf164 - 2011-06-08 8:44 PM
I have the Kruzer Kaddy on my right hand side of the handle bars chrome looks great
+1 but on the left.
+1 on each Vision on the left.
|
|
| |
|
Cruiser
Posts: 160
Camas Washington | Every morning I ride into work with a large 32 oz cup of java (plastic starbucks clear cup). I use the Victory holder with the ram ball on the left side. Works great. The key is the have the mount sticking straight up with a little lean to the back. This way the cup will lean up against the arm and sway around. The holder has 2 hooks which I take a large rubber band to hold in place until I get to work. If i want to drink while riding it requires a smaller cup with out the rubber band holding it in place. Smaller cup the wind will not effect it in the holder. |
|
| |
|
Cruiser
Posts: 102
Cedar, Michigan | So you guys that have a Ram Ball mounted toward the outside of the clutch and brake reservoirs must have a different housing than I do. There is no hole tapped on my 2008 Vision Premium Tour.
(DSC04684.JPG)
(DSC04685.JPG)
Attachments
----------------
DSC04684.JPG (58KB - 2 downloads)
DSC04685.JPG (60KB - 1 downloads)
|
|
| |
|
Visionary
Posts: 1359
New Bohemia, Va | Mattchristiani - 2011-06-09 12:12 PM
So you guys that have a Ram Ball mounted toward the outside of the clutch and brake reservoirs must have a different housing than I do. There is no hole tapped on my 2008 Vision Premium Tour.
that's true, you can do your own though as some has done, or buy newer ones with the holes. |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | The replacement bottom clamp half that came with my VICTORY holder has two pre tapped holes, one mounts theball up the other points it aft |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | I use the reliable Co-Pilot Caddy. She doesn't have much other stuff to do, and she is welcome to sip from my cup while she holds it for me. When I need a sip, she passes me the straw.
BONUS: Auto refills whenever I stop - best Drinkholder EVER !
|
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | Correct - 08 did not have them... 09 and up do.
|
|
| |
|
Cruiser
Posts: 175
Hinton, Iowa | Try this Kruser Kaddy mount made just for the Vision.
Hey Everyone....just wanted to give you a heads up.We are an official Kruzer Kaddy Dealer.
I stock the Vision Clutch Mount for the Kruzer Kaddy Cup Holders.
If you have been looking for one...you can get them here.
http://www.noemtz.com/kruzerkaddy.htm
Thanks!
NOEMTZ |
|
| |
|
Cruiser
Posts: 199
Salt Lake City | airguy - 2011-06-09 3:05 PM
Try this Kruser Kaddy mount made just for the Vision.
http://www.noemtz.com/kruzerkaddy.htm
yep, yep, yep - thats the one I have. An excellent piece of work. |
|
| |
|
Cruiser
Posts: 277
Apopka, FL | I use the mount I purchased from Noemtz too. It works well. Buy it, the price is right. |
|
| |
|
Cruiser
Posts: 277
Apopka, FL | Rear passenger cupholder = Victory armrests... they have the cupholder under the right arm that swings out.
|
|
| |
|
Puddle Jumper
Posts: 23
Stony Mountain, MB Canada | I just drilled and tapped a hole on the forward side on the left side of the solid handlebars of my 2009 and then screwed the mounting bolt in for the Kruzer Kaddy and mounted the cup holder right onto that. |
|
| |
Cupholders????
