(2 Comments) Made a bracket from 1/4" x 1" x 2 1/2" aluminum. Bent the bracket at a 40-45 degree angle. Which allows the brake lines to clear the air horn. Drilled two holes in the aluminum bracket and mounted using one of the gas tank bolts. Grounded the horn using the factory horn location. | Stebel Air Horn mounted to 1/4" thick aluminum bracket. | Bolted horn relay up out of the way. | Wired horn (+) to #87 on relay - horn switch (grey wire) to #86 on relay - grounded #85 on relay - power from battery side terminal to #30 on relay with an in line 20amp fuse. |
20 amp in line fuse | Stebel Air Horn clears brake lines,fairing and grill:) | ||
| Copyright © 2007-2024 Victory Riders Network™ |