You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 32
shelbyville tennessee | I had a idea today while i was riding, i was wondering if you could take the audio out put wires from the cb radio and then wire it in to the factory gps audio harness so the sould would come from the out side speakers and mute the radio when radio traffic is on the cb, does anyone know the color codes and wire pin out of the cb harness, i might give this a try and let you know if it works. |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Here is a link to a copy of the 2008 Victory Vision Service Manual and other documents. I am sure what you are looking for is in there.
http://www.mediafire.com/2008visioninfo
|
|
| |
|
Cruiser
Posts: 174
Edmonton, AB | misterclean911 - 2008-10-11 6:27 PM
....does anyone know the color codes and wire pin out of the cb harness, ....
I'm not sure about the colour codes for CB harness but if you check this thread from back in June, just over half way down there is a post from Spock that gives the colour codes for the GPS Wire harness. That should at least help you with some of the info you are looking for.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=1183&pos...
Hope this helps & good luck. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Cb audio output
